B1917 – OBD-II DTC

OBD-II DTC B1917 – Air Bag Memory Clear Circuit Failure

DTC B1917 meaning

DTC B1917 refers to a fault in the airbag system, specifically indicating a failure in the Air Bag Memory Clear Circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for malfunctions. The Air Bag Memory Clear Circuit is responsible for clearing stored fault codes and resetting the airbag system after repairs or maintenance. When this circuit fails, it can prevent the airbag system from functioning correctly, posing a safety risk.

DTC B1917 symptoms

Common symptoms associated with DTC B1917 may include:

• Illumination of the airbag warning light on the dashboard
• Inability to reset or clear airbag fault codes
• Potential malfunction of the airbag deployment system
• Diagnostic trouble codes related to the airbag system

DTC B1917 causes

Several factors can lead to the occurrence of DTC B1917, including:

• Faulty airbag control module
• Wiring issues or damaged connectors in the airbag system
• Corrosion or poor connections in the memory clear circuit
• Software glitches in the vehicle’s onboard computer
• Previous repairs that were not completed correctly

DTC B1917 seriousness

DTC B1917 is considered serious because it directly affects the airbag system’s functionality. If the airbag system is not operational, it may not deploy in the event of a collision, increasing the risk of injury to the occupants. Therefore, it is crucial to address this issue promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC B1917

To diagnose DTC B1917, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble codes from the vehicle’s computer.
2. Inspect the airbag control module and its connections for any visible damage or corrosion.
3. Check the wiring and connectors associated with the Air Bag Memory Clear Circuit.
4. Perform a continuity test on the circuit to ensure it is functioning correctly.
5. Review any previous repair history that may relate to the airbag system.
6. Clear the codes and see if the DTC reappears after a test drive.

How to fix DTC B1917 step-by-step instructions

To fix DTC B1917, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors related to the Air Bag Memory Clear Circuit.
3. Replace the airbag control module if it is found to be faulty.
4. Ensure all connections are clean and secure, eliminating any corrosion.
5. Reconnect the battery and use the OBD-II scanner to clear any stored codes.
6. Test the airbag system to ensure it is functioning correctly and that the DTC does not reappear.

How to erase DTC B1917

To erase DTC B1917, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the warning light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.