B1918 – OBD-II DTC

OBD-II DTC B1918 – Air Bag Memory Clear Circuit Open

DTC B1918 meaning

DTC B1918 refers to a diagnostic trouble code related to the airbag system, specifically indicating an issue with the Air Bag Memory Clear Circuit. This code suggests that there is an open circuit in the memory clear function of the airbag control module, which can prevent the system from properly resetting or clearing stored fault codes.

DTC B1918 symptoms

Common symptoms associated with DTC B1918 may include:

• Illumination of the airbag warning light on the dashboard
• Inability to clear previous airbag fault codes
• Potential malfunction of the airbag system during deployment
• Diagnostic scanner may show the B1918 code along with other related codes

DTC B1918 causes

Several factors can lead to the occurrence of DTC B1918, including:

• Faulty wiring or connectors in the airbag system
• Defective airbag control module
• Corrosion or damage to the memory clear circuit
• Issues with the vehicle’s battery or electrical system

DTC B1918 seriousness

DTC B1918 is considered serious because it indicates a potential failure in the airbag system. If the airbag system is not functioning correctly, it may not deploy in the event of a collision, increasing the risk of injury. Therefore, it is crucial to address this code promptly to ensure the safety of the vehicle occupants.

How to diagnose DTC B1918

To diagnose DTC B1918, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1918 code.
2. Inspect the airbag system wiring and connectors for any visible damage or corrosion.
3. Check the airbag control module for proper operation and any additional fault codes.
4. Test the continuity of the memory clear circuit to identify any open circuits.
5. Verify the vehicle’s battery voltage and electrical system integrity.

How to fix DTC B1918 step-by-step instructions

To fix DTC B1918, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. Replace the airbag control module if it is determined to be faulty.
4. Ensure all connections are secure and free from corrosion.
5. Reconnect the battery and use the OBD-II scanner to clear the DTC.
6. Perform a test drive to ensure the airbag system is functioning correctly and the warning light does not reappear.

How to erase DTC B1918

To erase DTC B1918, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to read or clear trouble codes on the scanner.
4. Select the option to clear or erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.
7. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.