B1922 – OBD-II DTC

OBD-II DTC B1922 – Air Bag Safing Sensor Output Circuit Short To Battery

DTC B1922 meaning

DTC B1922 refers to a diagnostic trouble code indicating a problem with the airbag system, specifically related to the safing sensor output circuit. This code suggests that there is a short circuit in the safing sensor output circuit that is connected directly to the battery voltage. The safing sensor is a critical component that helps determine whether the airbag should deploy in the event of a collision.

DTC B1922 symptoms

Common symptoms associated with DTC B1922 may include:

• Illumination of the airbag warning light on the dashboard
• Possible non-deployment of airbags during a collision
• Diagnostic scanner may show the B1922 code
• Other related airbag codes may also be present

DTC B1922 causes

Several factors can lead to the triggering of DTC B1922, including:

• Wiring issues such as frayed or damaged wires in the safing sensor circuit
• Corrosion or poor connections at the sensor or connector
• Faulty safing sensor itself
• Short circuit in the airbag system wiring
• Issues with the airbag control module

DTC B1922 seriousness

DTC B1922 is considered serious because it directly affects the functionality of the airbag system. If the airbag system is compromised, it may not deploy in the event of an accident, increasing the risk of injury. Therefore, it is crucial to address this code promptly to ensure passenger safety.

How to diagnose DTC B1922

To diagnose DTC B1922, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1922 code.
2. Inspect the wiring and connectors associated with the safing sensor for any visible damage or corrosion.
3. Check for continuity in the safing sensor output circuit.
4. Test the safing sensor using a multimeter to ensure it is functioning correctly.
5. Examine the airbag control module for any faults or issues.

How to fix DTC B1922 step-by-step instructions

To fix DTC B1922, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the safing sensor circuit.
3. If the safing sensor is faulty, replace it with a new one.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the code does not return.

How to erase DTC B1922

To erase DTC B1922, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.