B1925 – OBD-II DTC

OBD-II DTC B1925 – Air Bag Passenger Circuit Short To Battery

DTC B1925 meaning

DTC B1925 refers to a diagnostic trouble code indicating a short circuit in the airbag passenger circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems, including the airbag system. When the airbag control module detects an abnormal voltage level in the passenger airbag circuit, it triggers this code to alert the technician of a potential issue.

DTC B1925 symptoms

Common symptoms associated with DTC B1925 may include:

• Illumination of the airbag warning light on the dashboard
• Inoperative passenger airbag
• Possible diagnostic trouble codes related to the airbag system
• Increased risk of airbag deployment failure in a collision

DTC B1925 causes

Several factors can lead to the triggering of DTC B1925, including:

• Wiring issues, such as frayed or damaged wires in the passenger airbag circuit
• Corrosion or poor connections at the airbag module or connectors
• Faulty airbag module or passenger airbag sensor
• Short circuits caused by aftermarket modifications or installations

DTC B1925 seriousness

DTC B1925 is considered serious because it indicates a potential failure in the airbag system. If the passenger airbag is inoperative due to this code, it may not deploy in the event of a collision, increasing the risk of injury. Therefore, it is crucial to address this issue promptly to ensure the safety of vehicle occupants.

How to diagnose DTC B1925

To diagnose DTC B1925, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1925.
2. Inspect the wiring and connectors related to the passenger airbag circuit for any visible damage or corrosion.
3. Check for any additional DTCs that may provide more context to the issue.
4. Test the voltage and continuity of the passenger airbag circuit using a multimeter.
5. Examine the airbag module and sensor for proper operation.

How to fix DTC B1925 step-by-step instructions

To fix DTC B1925, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the passenger airbag circuit.
3. Clean any corroded connections to ensure good electrical contact.
4. If necessary, replace the airbag module or passenger airbag sensor.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the airbag system is functioning correctly and the warning light does not reappear.

How to erase DTC B1925

To erase DTC B1925, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.