B1927 – OBD-II DTC

OBD-II DTC B1927 – Passenger Side Airbag Fault

DTC B1927 meaning

DTC B1927 refers to a fault in the passenger side airbag system. This diagnostic trouble code indicates that the airbag control module has detected an issue with the passenger airbag, which may prevent it from deploying correctly in the event of a collision. The code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults.

DTC B1927 symptoms

Common symptoms associated with DTC B1927 may include:

• Illuminated airbag warning light on the dashboard
• Passenger airbag may be disabled
• Possible warning messages on the vehicle’s display
• Inconsistent airbag deployment during diagnostic tests

DTC B1927 causes

Several factors can lead to the triggering of DTC B1927, including:

• Faulty passenger airbag sensor
• Wiring issues or damaged connectors in the airbag system
• Defective airbag control module
• Improper installation of the passenger airbag
• Corrosion or dirt on electrical contacts

DTC B1927 seriousness

DTC B1927 is considered a serious issue because it directly affects the safety of the vehicle occupants. If the passenger airbag is not functioning correctly, it may not deploy in the event of an accident, increasing the risk of injury. It is crucial to address this code promptly to ensure the safety systems in the vehicle are operational.

How to diagnose DTC B1927

To diagnose DTC B1927, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1927.
2. Inspect the passenger airbag sensor and wiring for visible damage or disconnections.
3. Check the airbag control module for any additional codes that may provide more context.
4. Perform a continuity test on the wiring harness connected to the passenger airbag.
5. Test the passenger airbag sensor using a multimeter to ensure it is functioning within specifications.

How to fix DTC B1927 step-by-step instructions

To fix DTC B1927, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors related to the passenger airbag.
3. Replace the passenger airbag sensor if it is found to be faulty.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Use an OBD-II scanner to clear the DTC and check if the airbag warning light is off.
7. Perform a test drive to ensure the airbag system is functioning correctly.

How to erase DTC B1927

To erase DTC B1927, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.
7. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.