B1928 – OBD-II DTC

OBD-II DTC B1928 – Air Bag Safing Sensor Output Circuit Failure

DTC B1928 meaning

DTC B1928 refers to a failure in the airbag safing sensor output circuit. The safing sensor is a critical component in the airbag system, designed to determine whether a collision has occurred and whether the airbags should deploy. When the output circuit of this sensor fails, it can prevent the airbag system from functioning correctly, leading to potential safety risks in the event of an accident.

DTC B1928 symptoms

Common symptoms associated with DTC B1928 may include:

• Illumination of the airbag warning light on the dashboard
• Inconsistent airbag deployment during a collision
• Possible diagnostic trouble codes related to the airbag system
• Decreased functionality of other safety features

DTC B1928 causes

Several factors can lead to the occurrence of DTC B1928, including:

• Faulty safing sensor
• Wiring issues, such as shorts or open circuits in the sensor output circuit
• Corrosion or damage to connectors related to the airbag system
• Faulty airbag control module

DTC B1928 seriousness

DTC B1928 is considered serious because it directly impacts the functionality of the airbag system. If the airbag system is compromised, it may not deploy in the event of a collision, increasing the risk of injury or fatality. Therefore, it is crucial to address this issue promptly to ensure the safety of the vehicle occupants.

How to diagnose DTC B1928

To diagnose DTC B1928, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1928.
2. Inspect the airbag system wiring and connectors for any visible damage or corrosion.
3. Check the safing sensor for proper operation using a multimeter.
4. Test the airbag control module for any additional fault codes.
5. Perform a continuity test on the sensor output circuit.

How to fix DTC B1928 step-by-step instructions

To fix DTC B1928, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors related to the safing sensor.
3. If the safing sensor is faulty, replace it with a new one.
4. Reconnect all connectors and wiring securely.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to ensure the issue is resolved.

How to erase DTC B1928

To erase DTC B1928, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.