B1934 – OBD-II DTC

OBD-II DTC B1934 – Air Bag Driver Inflator Circuit Resistance Low on Squib

DTC B1934 meaning

DTC B1934 refers to a diagnostic trouble code indicating a low resistance in the airbag driver inflator circuit, specifically related to the squib. The squib is a small explosive device that ignites the airbag during a collision. A low resistance reading suggests that there may be a fault in the circuit, which can prevent the airbag from deploying properly in the event of an accident.

DTC B1934 symptoms

Common symptoms associated with DTC B1934 may include:

• Illuminated airbag warning light on the dashboard
• Possible non-deployment of the airbag during a collision
• Diagnostic scanner may show the B1934 code
• Other related codes may also be present

DTC B1934 causes

Several factors can lead to the occurrence of DTC B1934, including:

• Faulty airbag squib or inflator
• Damaged wiring or connectors in the airbag circuit
• Corrosion or poor connections in the airbag system
• Issues with the airbag control module
• Improper installation of the airbag system components

DTC B1934 seriousness

DTC B1934 is considered a serious issue because it directly affects the functionality of the airbag system. If the airbag does not deploy during a collision, it can lead to increased risk of injury or fatality for the occupants of the vehicle. Therefore, it is crucial to address this code promptly to ensure the safety of all passengers.

How to diagnose DTC B1934

To diagnose DTC B1934, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1934 code.
2. Inspect the airbag system wiring and connectors for any visible damage or corrosion.
3. Check the resistance of the airbag squib circuit using a multimeter.
4. Compare the resistance readings to the manufacturer’s specifications.
5. Test the airbag control module for any faults or issues.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC B1934 step-by-step instructions

To fix DTC B1934, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the airbag circuit.
3. If the squib is faulty, replace it with a new one according to manufacturer specifications.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Use an OBD-II scanner to clear the DTC and check for any reoccurrence of the code.

How to erase DTC B1934

To erase DTC B1934, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.