B1937 – OBD-II DTC

OBD-II DTC B1937 – Air Bag Passenger Pressure Switch Circuit Open

DTC B1937 meaning

DTC B1937 refers to an issue with the airbag system, specifically indicating that there is an open circuit in the passenger pressure switch. This switch is responsible for detecting whether a passenger is present in the front seat and whether the airbag should be deployed in the event of a collision. An open circuit means that the signal from the switch is not being received by the airbag control module, which can prevent the airbag from functioning properly.

DTC B1937 symptoms

Common symptoms associated with DTC B1937 may include:

• Illumination of the airbag warning light on the dashboard.
• Inconsistent airbag deployment in the event of a collision.
• Possible passenger seat sensor malfunction warnings.
• Increased risk of airbag system failure.

DTC B1937 causes

Several factors can lead to the occurrence of DTC B1937, including:

• A faulty passenger pressure switch.
• Wiring issues, such as frayed or broken wires in the circuit.
• Corrosion or poor connections at the switch or within the airbag system.
• Faulty airbag control module.

DTC B1937 seriousness

DTC B1937 is considered serious because it directly affects the functionality of the airbag system. If the passenger airbag is not deployed during a collision, it can lead to severe injury or fatality for the passenger. Therefore, it is crucial to address this issue promptly to ensure the safety of all vehicle occupants.

How to diagnose DTC B1937

To diagnose DTC B1937, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1937.
2. Inspect the passenger pressure switch and its wiring for visible damage or disconnections.
3. Check the resistance of the passenger pressure switch using a multimeter.
4. Examine the airbag control module for any additional fault codes that may provide further insight.
5. Perform a continuity test on the wiring between the switch and the control module.

How to fix DTC B1937 step-by-step instructions

To fix DTC B1937, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors related to the passenger pressure switch.
3. Replace the passenger pressure switch if it is found to be faulty.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the issue is resolved.

How to erase DTC B1937

To erase DTC B1937, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the warning light does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.