B1941 – OBD-II DTC

OBD-II DTC B1941 – Air Bag Crash Sensor #1 Feed/Return Circuit Open

DTC B1941 meaning

DTC B1941 refers to a diagnostic trouble code indicating an issue with the airbag system, specifically related to the crash sensor #1 feed/return circuit being open. This means that the circuit responsible for sending signals from the crash sensor to the airbag control module is not functioning properly, which can prevent the airbag from deploying in the event of a collision.

DTC B1941 symptoms

Common symptoms associated with DTC B1941 may include:

• Illumination of the airbag warning light on the dashboard
• Potential failure of the airbag system to deploy during a crash
• Increased risk of injury in the event of an accident
• Possible diagnostic trouble codes related to the airbag system

DTC B1941 causes

Several factors can lead to the occurrence of DTC B1941, including:

• Open or damaged wiring in the crash sensor circuit
• Faulty crash sensor #1
• Defective airbag control module
• Corrosion or poor connections in the circuit
• Issues with the vehicle’s electrical system

DTC B1941 seriousness

DTC B1941 is considered serious because it directly impacts the functionality of the airbag system. If the airbag system is compromised, it may not deploy during a collision, significantly increasing the risk of injury or fatality for the occupants of the vehicle. It is crucial to address this issue promptly to ensure the safety of all passengers.

How to diagnose DTC B1941

To diagnose DTC B1941, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1941.
2. Inspect the wiring and connectors related to crash sensor #1 for any visible damage or corrosion.
3. Check the resistance of the crash sensor to ensure it is within manufacturer specifications.
4. Test the airbag control module for proper operation.
5. Perform a continuity test on the feed/return circuit to identify any breaks or opens.

How to fix DTC B1941 step-by-step instructions

To fix DTC B1941, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the crash sensor circuit.
3. If the crash sensor is faulty, replace it with a new one according to manufacturer specifications.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Use an OBD-II scanner to clear the DTC and check for any reoccurrence.

How to erase DTC B1941

To erase DTC B1941, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.