B1942 – OBD-II DTC

OBD-II DTC B1942 – Air Bag Crash Sensor #2 Feed/Return Circuit Open

DTC B1942 meaning

DTC B1942 refers to a diagnostic trouble code indicating an issue with the Air Bag Crash Sensor #2 Feed/Return Circuit. Specifically, it signifies that there is an open circuit in the feed or return line of the crash sensor, which is crucial for the proper functioning of the airbag system. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components for faults.

DTC B1942 symptoms

Common symptoms associated with DTC B1942 may include:

• Illumination of the airbag warning light on the dashboard
• Potential malfunction of the airbag system
• Increased risk of airbag failure during a collision
• Diagnostic scanner may show the B1942 code

DTC B1942 causes

Several factors can lead to the triggering of DTC B1942, including:

• Damaged or corroded wiring in the airbag sensor circuit
• Faulty airbag crash sensor #2
• Loose or poor electrical connections
• Issues with the airbag control module
• Accidental disconnection of the sensor during repairs

DTC B1942 seriousness

DTC B1942 is considered serious because it directly affects the airbag system’s functionality. If the airbag system is compromised, it may not deploy in the event of a collision, increasing the risk of injury to the occupants. Therefore, it is crucial to address this code promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC B1942

To diagnose DTC B1942, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1942 code.
2. Inspect the wiring and connectors related to the airbag crash sensor #2 for any visible damage or corrosion.
3. Check for loose connections and ensure all connectors are securely attached.
4. Test the airbag crash sensor #2 using a multimeter to verify its functionality.
5. Examine the airbag control module for any faults or issues.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC B1942 step-by-step instructions

To fix DTC B1942, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect the wiring and connectors for the airbag crash sensor #2, repairing or replacing any damaged components.
3. Reconnect any loose connections and ensure all connectors are secure.
4. If the airbag crash sensor #2 is faulty, replace it with a new sensor.
5. Reconnect the vehicle’s battery.
6. Use an OBD-II scanner to clear the DTC and check for any reoccurrence of the code.

How to erase DTC B1942

To erase DTC B1942, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.