B1944 – OBD-II DTC

OBD-II DTC B1944 – Air Bag Crash Sensor #1 Ground Circuit Open

DTC B1944 meaning

DTC B1944 refers to a diagnostic trouble code indicating an issue with the airbag system, specifically related to the crash sensor #1 ground circuit being open. This means that the ground connection for the crash sensor is not functioning properly, which can prevent the airbag system from deploying in the event of a collision.

DTC B1944 symptoms

Common symptoms associated with DTC B1944 may include:

• Illuminated airbag warning light on the dashboard
• Potential failure of the airbag system to deploy during an accident
• Diagnostic trouble code stored in the vehicle’s computer
• Possible other related codes indicating airbag system issues

DTC B1944 causes

Several factors can lead to the occurrence of DTC B1944, including:

• Damaged or corroded wiring in the crash sensor ground circuit
• Faulty crash sensor #1
• Loose or poor connections at the crash sensor or related connectors
• Issues with the airbag control module
• Previous collision damage affecting the airbag system

DTC B1944 seriousness

DTC B1944 is considered serious because it directly impacts the functionality of the airbag system. If the ground circuit is open, the airbag may not deploy in the event of a crash, increasing the risk of injury to occupants. It is crucial to address this issue promptly to ensure the safety of the vehicle’s occupants.

How to diagnose DTC B1944

To diagnose DTC B1944, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1944.
2. Inspect the wiring and connectors related to crash sensor #1 for any visible damage or corrosion.
3. Check the ground circuit continuity using a multimeter.
4. Test the crash sensor #1 for proper operation.
5. Examine the airbag control module for any faults or issues.

How to fix DTC B1944 step-by-step instructions

To fix DTC B1944, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the crash sensor #1 ground circuit.
3. Replace crash sensor #1 if it is found to be faulty.
4. Ensure all connections are secure and free of corrosion.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to verify that the airbag warning light does not reappear.

How to erase DTC B1944

To erase DTC B1944, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and turn off the ignition.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.