B1982 – OBD-II DTC

OBD-II DTC B1982 – Driver’s Door Unlock Relay Circuit Failure

DTC B1982 meaning

DTC B1982 refers to a fault in the driver’s door unlock relay circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the relay responsible for unlocking the driver’s door. The relay may be malfunctioning, or there could be a problem with the wiring or connections associated with it.

DTC B1982 symptoms

Common symptoms associated with DTC B1982 may include:

• Driver’s door not unlocking with the remote or key fob.
• Driver’s door not unlocking with the interior switch.
• Intermittent unlocking issues.
• Other door locks may function normally.
• Warning lights on the dashboard related to the door lock system.

DTC B1982 causes

Several factors can lead to the occurrence of DTC B1982, including:

• Faulty driver’s door unlock relay.
• Damaged or corroded wiring in the relay circuit.
• Loose or poor connections at the relay or door lock actuator.
• Malfunctioning door lock actuator.
• Issues with the vehicle’s body control module (BCM).

DTC B1982 seriousness

The seriousness of DTC B1982 can vary. While it may not affect the vehicle’s overall drivability, it can lead to security concerns if the driver’s door cannot be unlocked. Additionally, if left unaddressed, it may indicate underlying electrical issues that could affect other systems in the vehicle.

How to diagnose DTC B1982

To diagnose DTC B1982, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1982.
2. Inspect the driver’s door unlock relay for visible damage or corrosion.
3. Check the wiring and connectors associated with the relay for any signs of wear or damage.
4. Test the relay using a multimeter to ensure it is functioning correctly.
5. Examine the door lock actuator for proper operation.
6. Check the body control module for any related fault codes.

How to fix DTC B1982 step-by-step instructions

To fix DTC B1982, follow these steps:

1. Replace the faulty driver’s door unlock relay if it is determined to be defective.
2. Repair or replace any damaged wiring or connectors in the relay circuit.
3. Ensure all connections are secure and free of corrosion.
4. If the door lock actuator is malfunctioning, replace it as necessary.
5. Clear the DTC using an OBD-II scanner after repairs are made.
6. Test the system to ensure the driver’s door unlocks properly.

How to erase DTC B1982

To erase DTC B1982, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the diagnostic trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.