B1988 – OBD-II DTC

OBD-II DTC B1988 – Pedal Position Forward Switch Circuit Short to Battery

DTC B1988 meaning

DTC B1988 refers to a diagnostic trouble code indicating a short circuit in the Pedal Position Forward Switch Circuit to battery voltage. This code is specific to the vehicle’s body control module (BCM) and is related to the functionality of the accelerator pedal position sensor. When the BCM detects that the pedal position forward switch is continuously receiving battery voltage, it triggers this code.

DTC B1988 symptoms

Common symptoms associated with DTC B1988 may include:

• Illumination of the check engine light or warning indicator on the dashboard.
• Unresponsive or erratic throttle behavior.
• Difficulty in accelerating or maintaining speed.
• Potential issues with cruise control functionality.

DTC B1988 causes

Several factors can lead to the triggering of DTC B1988, including:

• A short circuit in the wiring of the pedal position forward switch.
• Faulty pedal position forward switch.
• Corrosion or damage in the electrical connectors related to the switch.
• Issues within the body control module itself.

DTC B1988 seriousness

DTC B1988 can be considered serious as it affects the vehicle’s throttle response and overall drivability. If left unaddressed, it may lead to unsafe driving conditions, especially if the throttle becomes unresponsive or behaves erratically. It is advisable to diagnose and repair this issue promptly to ensure safe vehicle operation.

How to diagnose DTC B1988

To diagnose DTC B1988, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B1988.
2. Inspect the wiring and connectors associated with the pedal position forward switch for any visible damage or corrosion.
3. Test the pedal position forward switch using a multimeter to check for proper operation.
4. Check for any additional DTCs that may provide further insight into the issue.
5. Examine the body control module for any faults or software issues.

How to fix DTC B1988 step-by-step instructions

To fix DTC B1988, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors related to the pedal position forward switch.
3. If the pedal position forward switch is faulty, replace it with a new component.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC B1988

To erase DTC B1988, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.