B1994 – OBD-II DTC

OBD-II DTC B1994 – Driver Side – Side mount Airbag Circuit Open

DTC B1994 meaning

DTC B1994 refers to a diagnostic trouble code indicating an open circuit in the driver side side mount airbag system. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components, including airbag systems. An open circuit means that there is a break in the electrical connection, preventing the airbag from functioning properly in the event of a collision.

DTC B1994 symptoms

Common symptoms associated with DTC B1994 may include:

• Illumination of the airbag warning light on the dashboard
• Potential malfunction of the driver side airbag
• Increased risk of airbag deployment failure in an accident

DTC B1994 causes

Several factors can lead to the occurrence of DTC B1994, including:

• Damaged or frayed wiring in the airbag circuit
• Faulty connectors or terminals
• Defective airbag module
• Issues with the airbag sensor
• Corrosion or poor connections in the airbag system

DTC B1994 seriousness

DTC B1994 is considered serious because it indicates a potential failure in the airbag system. If the airbag does not deploy during a collision, it can significantly increase the risk of injury to the driver. Therefore, it is crucial to address this issue promptly to ensure the safety of the vehicle occupants.

How to diagnose DTC B1994

To diagnose DTC B1994, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B1994 code.
2. Inspect the wiring and connectors associated with the driver side airbag for any visible damage or corrosion.
3. Check the airbag module and sensor for proper operation.
4. Perform continuity tests on the airbag circuit to identify any breaks.
5. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC B1994 step-by-step instructions

To fix DTC B1994, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors found during diagnosis.
3. Replace any faulty airbag modules or sensors as needed.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the battery and use the OBD-II scanner to clear the DTC.
6. Test the airbag system to ensure proper functionality.

How to erase DTC B1994

To erase DTC B1994, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.