B2114 – OBD-II DTC

OBD-II DTC B2114 – Front Washer Input Short to Ground

DTC B2114 meaning

DTC B2114 refers to a diagnostic trouble code indicating a “Front Washer Input Short to Ground.” This code is generated when the vehicle’s onboard diagnostic system detects that the front washer input circuit is shorted to ground, which can affect the operation of the windshield washer system.

DTC B2114 symptoms

Common symptoms associated with DTC B2114 may include:

• Inoperative front windshield washer system
• Washer fluid warning light illuminated on the dashboard
• Erratic operation of the washer system
• Possible related issues with other electrical components

DTC B2114 causes

Several factors can lead to the triggering of DTC B2114, including:

• Short circuit in the front washer input wiring
• Faulty front washer switch
• Damaged or corroded connectors in the washer system
• Malfunctioning body control module (BCM)

DTC B2114 seriousness

The seriousness of DTC B2114 can vary, but it is generally considered a moderate issue. While it may not prevent the vehicle from being driven, the inoperative front washer system can impair visibility during adverse weather conditions, posing a safety risk.

How to diagnose DTC B2114

To diagnose DTC B2114, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2114 code.
2. Inspect the front washer input circuit for visible damage or corrosion.
3. Check the front washer switch for proper operation.
4. Test the continuity of the wiring between the switch and the BCM.
5. Examine the BCM for any faults or issues.

How to fix DTC B2114 step-by-step instructions

To fix DTC B2114, follow these steps:

1. Repair or replace any damaged wiring or connectors in the front washer input circuit.
2. Replace the front washer switch if it is found to be faulty.
3. Ensure all connections are clean and secure.
4. If necessary, reprogram or replace the BCM.
5. Clear the DTC using an OBD-II scanner and test the washer system for proper operation.

How to erase DTC B2114

To erase DTC B2114, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.