B2117 – OBD-II DTC

OBD-II DTC B2117 – Driver Side – Side mount Airbag Low capacitance on Squib

DTC B2117 meaning

DTC B2117 refers to a diagnostic trouble code indicating a low capacitance issue with the driver side side mount airbag squib. The squib is an essential component of the airbag system, responsible for igniting the airbag when a collision occurs. A low capacitance reading suggests that there may be a fault in the squib circuit, which can prevent the airbag from deploying properly in the event of an accident.

DTC B2117 symptoms

Common symptoms associated with DTC B2117 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the airbag system
• Increased risk of airbag failure during a collision

DTC B2117 causes

Several factors can lead to the occurrence of DTC B2117, including:

• Faulty airbag squib
• Wiring issues, such as frayed or damaged wires
• Corrosion or poor connections in the airbag circuit
• Faulty airbag control module
• Improper installation or replacement of the airbag system components

DTC B2117 seriousness

DTC B2117 is considered serious because it indicates a potential failure in the airbag system. If the airbag does not deploy during a collision, it can significantly increase the risk of injury or fatality for the occupants of the vehicle. Therefore, it is crucial to address this issue promptly to ensure the safety of all passengers.

How to diagnose DTC B2117

To diagnose DTC B2117, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2117 code.
2. Inspect the airbag squib and its wiring for any visible damage or corrosion.
3. Check the airbag control module for any additional trouble codes that may provide more context.
4. Test the resistance of the squib circuit to ensure it falls within the manufacturer’s specifications.
5. Perform a continuity test on the wiring to ensure there are no breaks or shorts.

How to fix DTC B2117 step-by-step instructions

To fix DTC B2117, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors associated with the airbag squib.
3. If the squib is faulty, replace it with a new one that meets OEM specifications.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the vehicle’s battery.
6. Clear the DTC using an OBD-II scanner and perform a test drive to verify that the airbag warning light does not reappear.

How to erase DTC B2117

To erase DTC B2117, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to ensure the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.