B2144 – OBD-II DTC

OBD-II DTC B2144 – NVM Alarm Data Failure

DTC B2144 meaning

DTC B2144 refers to a Non-Volatile Memory (NVM) Alarm Data Failure in the vehicle’s onboard diagnostic system. This code indicates that the system has detected an issue with the storage of critical data related to the vehicle’s operation, which may affect various electronic control units (ECUs). The NVM is essential for retaining important information even when the vehicle is turned off.

DTC B2144 symptoms

Common symptoms associated with DTC B2144 may include:

• Illumination of the check engine light
• Loss of certain vehicle functions or features
• Erratic behavior of electronic components
• Difficulty in starting the vehicle

DTC B2144 causes

The causes of DTC B2144 can vary, but typical reasons include:

• Faulty or damaged NVM chip
• Corrupted data in the ECU
• Electrical issues such as short circuits or open circuits
• Software glitches or outdated firmware
• Improper connections or wiring issues

DTC B2144 seriousness

DTC B2144 is considered a moderate to serious issue. While it may not immediately affect the drivability of the vehicle, it can lead to more significant problems if not addressed. The failure of NVM can result in loss of critical data, which may impair the vehicle’s performance and functionality.

How to diagnose DTC B2144

To diagnose DTC B2144, follow these steps:

1. Use an OBD-II scanner to retrieve the DTC and any related codes.
2. Inspect the vehicle’s wiring and connectors for any visible damage or corrosion.
3. Check the NVM chip and related components for faults.
4. Review the vehicle’s service history for any previous issues related to the ECU.
5. Perform a software update on the ECU if applicable.
6. Clear the DTC and perform a test drive to see if the code returns.

How to fix DTC B2144 step-by-step instructions

To fix DTC B2144, follow these step-by-step instructions:

1. Ensure the vehicle is turned off and disconnect the battery.
2. Inspect and repair any damaged wiring or connectors related to the ECU.
3. Replace the faulty NVM chip if necessary.
4. Reprogram or update the ECU software to the latest version.
5. Reconnect the battery and start the vehicle.
6. Use the OBD-II scanner to check for any remaining codes.
7. Test drive the vehicle to ensure the issue is resolved.

How to erase DTC B2144

To erase DTC B2144, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to verify that the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.