B2145 – OBD-II DTC

OBD-II DTC B2145 – NVM RF HR Failure

DTC B2145 meaning

DTC B2145 refers to a Non-Volatile Memory (NVM) Radio Frequency (RF) Hardware Failure. This code indicates that the vehicle’s onboard diagnostic system has detected a malfunction in the RF hardware component responsible for communication and control functions within the vehicle’s electronic systems.

DTC B2145 symptoms

Common symptoms associated with DTC B2145 may include:

• Inoperative or malfunctioning radio or audio system
• Loss of communication with other electronic modules
• Warning lights illuminated on the dashboard
• Intermittent or complete failure of remote keyless entry functions

DTC B2145 causes

The causes of DTC B2145 can vary, but typical reasons include:

• Faulty RF hardware component
• Wiring issues, such as shorts or open circuits
• Corrosion or poor connections in the electrical system
• Software glitches or outdated firmware in the vehicle’s control modules

DTC B2145 seriousness

DTC B2145 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to significant problems with electronic systems, including safety features and convenience functions. Ignoring this code may result in further complications and costly repairs.

How to diagnose DTC B2145

To diagnose DTC B2145, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Check for any additional DTCs that may provide more context.
3. Inspect the RF hardware and associated wiring for visible damage or corrosion.
4. Test the RF hardware component for proper functionality.
5. Review the vehicle’s service history for any previous repairs related to the RF system.
6. Consult the vehicle’s service manual for specific diagnostic procedures related to DTC B2145.

How to fix DTC B2145 step-by-step instructions

To fix DTC B2145, follow these step-by-step instructions:

1. Perform a visual inspection of the RF hardware and wiring.
2. Repair or replace any damaged wiring or connectors.
3. Replace the faulty RF hardware component if necessary.
4. Update the vehicle’s software or firmware if applicable.
5. Clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC B2145

To erase DTC B2145, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC clearing function on the scanner.
4. Select the option to clear or erase the DTCs.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to verify that the DTC has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.