B2149 – OBD-II DTC

OBD-II DTC B2149 – Seat Front Vertical Motor Position Out of Range

DTC B2149 meaning

DTC B2149 refers to a diagnostic trouble code indicating that the front vertical motor position of a vehicle’s seat is out of range. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components and systems in the vehicle for proper operation. When the seat’s vertical motor does not operate within the expected parameters, this code is triggered, signaling a potential issue with the seat adjustment mechanism.

DTC B2149 symptoms

Common symptoms associated with DTC B2149 may include:

• Inability to adjust the seat height
• Seat position may be stuck or unresponsive
• Warning lights on the dashboard related to the seat or airbag system
• Unusual noises from the seat adjustment mechanism

DTC B2149 causes

Several factors can lead to the triggering of DTC B2149, including:

• Faulty vertical motor or actuator
• Wiring issues, such as damaged or corroded connectors
• Malfunctioning seat position sensors
• Software glitches in the vehicle’s control module
• Mechanical obstructions preventing seat movement

DTC B2149 seriousness

The seriousness of DTC B2149 can vary. While it may not affect the vehicle’s drivability, it can impact the comfort and safety of the driver and passengers. If the seat cannot be adjusted properly, it may lead to improper seating positions, which can be a safety concern in the event of an accident. Additionally, if the issue is related to the airbag system, it could affect the deployment of airbags during a collision.

How to diagnose DTC B2149

To diagnose DTC B2149, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2149 code.
2. Inspect the seat adjustment mechanism for any visible damage or obstructions.
3. Check the wiring and connectors associated with the vertical motor for signs of wear or corrosion.
4. Test the vertical motor and seat position sensors for proper operation.
5. Review the vehicle’s service manual for specific diagnostic procedures related to the seat adjustment system.

How to fix DTC B2149 step-by-step instructions

To fix DTC B2149, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner and test drive the vehicle to see if the code reappears.
2. If the code returns, inspect the seat adjustment mechanism for any mechanical issues.
3. Repair or replace any damaged wiring or connectors found during the inspection.
4. Test the vertical motor and replace it if it is found to be faulty.
5. Check and replace the seat position sensors if they are not functioning correctly.
6. Recheck the system and clear any codes after repairs are made.

How to erase DTC B2149

To erase DTC B2149, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.