B2201 – OBD-II DTC

OBD-II DTC B2201 – No Communication With Traffic MasterModule

DTC B2201 meaning

DTC B2201 indicates that there is no communication with the Traffic Master Module (TMM) in the vehicle’s network. The Traffic Master Module is responsible for processing data related to traffic conditions and may interact with other modules for optimal vehicle performance. When this code is triggered, it suggests a communication failure between the TMM and the vehicle’s onboard diagnostic system.

DTC B2201 symptoms

Common symptoms associated with DTC B2201 may include:

• Warning lights on the dashboard, particularly the check engine light.
• Inability to access certain traffic-related features or functions.
• Erratic behavior of vehicle systems that rely on traffic data.
• Potential issues with navigation or route guidance systems.

DTC B2201 causes

Several factors can lead to the occurrence of DTC B2201, including:

• Faulty Traffic Master Module.
• Wiring issues, such as damaged or corroded connectors.
• Software glitches or outdated firmware in the TMM.
• Problems with the vehicle’s communication network, such as CAN bus issues.
• Other related module failures that affect communication.

DTC B2201 seriousness

The seriousness of DTC B2201 can vary based on the vehicle’s reliance on the Traffic Master Module. While it may not immediately affect drivability, it can lead to:

• Increased risk of accidents due to lack of traffic data.
• Inability to utilize advanced driver-assistance systems.
• Potential for further electrical issues if left unaddressed.

How to diagnose DTC B2201

To diagnose DTC B2201, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2201.
2. Check for any additional DTCs that may provide more context.
3. Inspect the wiring and connectors related to the Traffic Master Module for damage or corrosion.
4. Test the Traffic Master Module for proper operation using manufacturer-specific diagnostic tools.
5. Verify the integrity of the vehicle’s communication network.

How to fix DTC B2201 step-by-step instructions

To fix DTC B2201, follow these steps:

1. Repair or replace any damaged wiring or connectors associated with the Traffic Master Module.
2. If the Traffic Master Module is faulty, replace it with a new or refurbished unit.
3. Update the software or firmware of the Traffic Master Module if applicable.
4. Clear any additional DTCs that may have been triggered during the diagnosis.
5. Re-scan the vehicle to ensure DTC B2201 has been resolved.

How to erase DTC B2201

To erase DTC B2201, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the diagnostic menu and select the option to clear or erase DTCs.
3. Confirm the action to erase the codes.
4. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.