B2204 – OBD-II DTC

OBD-II DTC B2204 – GPS Antenna Connection Open or Short

DTC B2204 meaning

DTC B2204 refers to a diagnostic trouble code indicating a problem with the GPS antenna connection in a vehicle. Specifically, it signifies that there is an open or short circuit in the GPS antenna circuit, which can affect the vehicle’s navigation and location services.

DTC B2204 symptoms

Common symptoms associated with DTC B2204 may include:

• Inaccurate GPS readings or failure to acquire a GPS signal
• Navigation system malfunction or failure
• Warning lights on the dashboard related to the GPS or navigation system
• Loss of other functionalities that depend on GPS data

DTC B2204 causes

The causes of DTC B2204 can include:

• Damaged or frayed GPS antenna wiring
• Faulty GPS antenna
• Corrosion or poor connections at the GPS antenna connector
• Issues with the vehicle’s body control module (BCM) or other related electronic control units

DTC B2204 seriousness

DTC B2204 is considered a moderate issue. While it may not affect the vehicle’s ability to operate, it can significantly impair navigation and location services, which can be critical for safe driving and route planning. Ignoring this code may lead to further complications in the vehicle’s electronic systems.

How to diagnose DTC B2204

To diagnose DTC B2204, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2204 code.
2. Inspect the GPS antenna and its wiring for visible damage or disconnections.
3. Check the GPS antenna connector for corrosion or poor contact.
4. Test the continuity of the wiring between the GPS antenna and the control module.
5. Verify the functionality of the GPS antenna using a multimeter.
6. Check for any related trouble codes that may indicate additional issues.

How to fix DTC B2204 step-by-step instructions

To fix DTC B2204, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors associated with the GPS antenna.
3. If the GPS antenna is faulty, replace it with a new one.
4. Clean any corrosion from connectors and ensure a secure connection.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the GPS system to ensure it is functioning correctly.

How to erase DTC B2204

To erase DTC B2204, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to check if the code reappears.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.