B2228 – OBD-II DTC

OBD-II DTC B2228 – Air Bag Driver Circuit Short to Ground – Loop #2

DTC B2228 meaning

DTC B2228 refers to a diagnostic trouble code indicating a short to ground in the airbag driver circuit, specifically in loop #2. This code is part of the OBD-II system, which monitors various vehicle systems for faults. The airbag system is crucial for passenger safety, and any issues detected can prevent the airbags from deploying in the event of a collision.

DTC B2228 symptoms

Common symptoms associated with DTC B2228 may include:

• Illuminated airbag warning light on the dashboard
• Possible malfunction of the airbag system
• Inconsistent airbag deployment during testing
• Diagnostic scanner may show additional related codes

DTC B2228 causes

Several factors can lead to the triggering of DTC B2228, including:

• Wiring issues such as frayed or damaged wires in the airbag circuit
• Faulty connectors or poor connections in the airbag system
• Defective airbag module or driver circuit components
• Moisture or corrosion affecting electrical connections

DTC B2228 seriousness

DTC B2228 is considered serious because it indicates a potential failure in the airbag system. If the airbag system is compromised, it may not deploy during an accident, increasing the risk of injury. Therefore, it is essential to address this code promptly to ensure the safety of the vehicle occupants.

How to diagnose DTC B2228

To diagnose DTC B2228, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2228.
2. Inspect the airbag wiring harness and connectors for visible damage or corrosion.
3. Check for continuity in the airbag driver circuit using a multimeter.
4. Test the airbag module and related components for proper functionality.
5. Clear the code and perform a road test to see if the code returns.

How to fix DTC B2228 step-by-step instructions

To fix DTC B2228, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair any damaged wiring or connectors in the airbag circuit.
3. Replace any faulty components identified during diagnosis, such as the airbag module.
4. Reconnect all connectors and ensure they are secure.
5. Reconnect the battery and use an OBD-II scanner to clear the DTC.
6. Perform a road test to verify that the issue is resolved and the code does not return.

How to erase DTC B2228

To erase DTC B2228, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.