B2240 – OBD-II DTC

OBD-II DTC B2240 – Rear Cargo Door Reset Switch Stuck (Short to Ground)

DTC B2240 meaning

DTC B2240 refers to a diagnostic trouble code indicating that the rear cargo door reset switch is stuck or has a short to ground. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. When the system detects that the reset switch is not functioning correctly, it triggers this code to alert the technician of a potential issue.

DTC B2240 symptoms

Common symptoms associated with DTC B2240 may include:

• Inability to open or close the rear cargo door electronically.
• Warning lights illuminated on the dashboard.
• Malfunctioning rear cargo door features, such as automatic locking or unlocking.
• Erratic behavior of the rear cargo door switch.

DTC B2240 causes

Several factors can lead to the triggering of DTC B2240, including:

• A faulty rear cargo door reset switch.
• Wiring issues, such as frayed or damaged wires.
• Corrosion or poor connections in the electrical system.
• Short circuits in the wiring harness.
• Faulty body control module (BCM) or related components.

DTC B2240 seriousness

The seriousness of DTC B2240 can vary depending on the vehicle’s use and the specific symptoms present. While it may not pose an immediate safety risk, it can lead to:

• Inconvenience due to the inability to access the rear cargo area.
• Potential for further electrical issues if left unaddressed.
• Increased repair costs if the problem worsens over time.

How to diagnose DTC B2240

To diagnose DTC B2240, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2240 code.
2. Inspect the rear cargo door reset switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the reset switch with a multimeter to ensure it operates correctly.
5. Examine the body control module for faults or software issues.

How to fix DTC B2240 step-by-step instructions

To fix DTC B2240, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the rear cargo door reset switch if it is found to be faulty.
3. Repair or replace any damaged wiring or connectors associated with the reset switch.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Test the rear cargo door operation to ensure the issue is resolved.

How to erase DTC B2240

To erase DTC B2240, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes from the vehicle’s memory.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.