B2243 – OBD-II DTC

OBD-II DTC B2243 – Driver Rear Door Ajar Circuit Open

DTC B2243 meaning

DTC B2243 refers to a diagnostic trouble code indicating an issue with the Driver Rear Door Ajar Circuit. This code is triggered when the vehicle’s onboard diagnostic system detects an open circuit in the door ajar switch for the driver’s rear door. The door ajar switch is responsible for signaling whether the door is closed or open, and a malfunction can lead to incorrect readings, affecting the vehicle’s security and convenience features.

DTC B2243 symptoms

Common symptoms associated with DTC B2243 may include:

• Warning light on the dashboard indicating a door ajar
• Inconsistent door locking or unlocking behavior
• Interior lights remaining on when the vehicle is off
• Chimes or alerts sounding when the vehicle is in motion

DTC B2243 causes

Several factors can lead to the triggering of DTC B2243, including:

• Faulty door ajar switch
• Wiring issues, such as frayed or broken wires
• Corrosion or poor connections in the door harness
• Faulty Body Control Module (BCM)

DTC B2243 seriousness

The seriousness of DTC B2243 can vary. While it may not pose an immediate safety risk, it can lead to inconvenience and potential security issues. If the door ajar system is malfunctioning, it may prevent the vehicle from locking properly, increasing the risk of theft. Additionally, leaving interior lights on can drain the battery over time.

How to diagnose DTC B2243

To diagnose DTC B2243, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the driver rear door ajar switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the door ajar switch with a multimeter to ensure it operates correctly.
5. Examine the Body Control Module (BCM) for faults or software issues.

How to fix DTC B2243 step-by-step instructions

To fix DTC B2243, follow these steps:

1. Repair or replace the faulty door ajar switch if it is defective.
2. Fix any damaged wiring or connectors found during the inspection.
3. Clean any corrosion from connectors and ensure a secure fit.
4. If necessary, reprogram or replace the Body Control Module (BCM).
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B2243

To erase DTC B2243, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.