OBD-II DTC B2246 – Passenger Sliding Door Ajar Circuit Short to GND
DTC B2246 meaning
DTC B2246 refers to a diagnostic trouble code indicating a problem with the passenger sliding door ajar circuit. Specifically, it signifies that the circuit is shorted to ground, which means that the electrical signal intended to indicate whether the door is closed or open is being interrupted or falsely triggered by a ground connection.
DTC B2246 symptoms
Common symptoms associated with DTC B2246 may include:
- Warning lights on the dashboard, such as the door ajar light.
- Inability to lock or unlock the passenger sliding door.
- Audible alerts indicating the door is ajar when it is closed.
- Malfunctioning interior lights that do not turn off when the door is closed.
DTC B2246 causes
Several factors can lead to the occurrence of DTC B2246, including:
- A short circuit in the wiring harness related to the passenger sliding door.
- Faulty door ajar switch that is stuck or malfunctioning.
- Corrosion or damage to electrical connectors associated with the door system.
- Issues with the body control module (BCM) that processes the door status signals.
DTC B2246 seriousness
The seriousness of DTC B2246 can vary based on the vehicle’s use and the specific symptoms present. While it may not pose an immediate safety risk, it can lead to:
- Inconvenience due to the inability to secure the vehicle properly.
- Increased battery drain if interior lights remain on.
- Potential for further electrical issues if left unaddressed.
How to diagnose DTC B2246
To diagnose DTC B2246, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the wiring and connectors related to the passenger sliding door for any visible damage or corrosion.
- Test the door ajar switch for proper operation using a multimeter.
- Check for any additional codes that may indicate related issues.
- Examine the body control module for faults or software issues.
How to fix DTC B2246 step-by-step instructions
To fix DTC B2246, follow these step-by-step instructions:
- Disconnect the vehicle’s battery to ensure safety while working on electrical components.
- Inspect the wiring harness for the passenger sliding door for any signs of wear, fraying, or short circuits.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Test the door ajar switch for continuity and replace it if it is faulty.
- Reconnect the battery and clear the DTC using an OBD-II scanner.
- Test the system by opening and closing the passenger sliding door to ensure the warning light and other symptoms are resolved.
How to erase DTC B2246
To erase DTC B2246, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn on the ignition without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the trouble codes from the vehicle’s memory.
- Disconnect the scanner and perform a test drive to ensure the code does not reappear.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.