B2341 – OBD-II DTC

OBD-II DTC B2341 – Column Tilt Motor Stalled

DTC B2341 meaning

DTC B2341 refers to a diagnostic trouble code indicating that the column tilt motor has stalled. This motor is responsible for adjusting the steering column’s angle to suit the driver’s preference. When the motor fails to operate correctly, it triggers this code, signaling a potential issue with the steering column adjustment system.

DTC B2341 symptoms

Common symptoms associated with DTC B2341 may include:

• Inability to adjust the steering column tilt
• Steering column stuck in one position
• Warning lights illuminated on the dashboard
• Unusual noises coming from the steering column area

DTC B2341 causes

Several factors can lead to the occurrence of DTC B2341, including:

• Faulty column tilt motor
• Wiring issues, such as shorts or open circuits
• Defective steering column control module
• Mechanical obstruction in the steering column
• Corrosion or poor connections in the electrical system

DTC B2341 seriousness

DTC B2341 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can lead to discomfort for the driver due to the inability to adjust the steering column. Additionally, if left unaddressed, it may indicate underlying electrical or mechanical problems that could worsen over time.

How to diagnose DTC B2341

To diagnose DTC B2341, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2341 code.
2. Inspect the steering column tilt motor for visible damage or wear.
3. Check the wiring and connectors for signs of corrosion or disconnection.
4. Test the column tilt motor’s operation using a multimeter.
5. Examine the steering column control module for faults.
6. Look for any mechanical obstructions that may hinder the motor’s movement.

How to fix DTC B2341 step-by-step instructions

To fix DTC B2341, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Test the column tilt motor for proper operation replace if faulty.
3. Repair or replace any damaged wiring or connectors.
4. Inspect and, if necessary, replace the steering column control module.
5. Ensure there are no mechanical obstructions in the steering column.
6. Recheck the system by performing a function test of the column tilt motor.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.