B2367 – OBD-II DTC

OBD-II DTC B2367 – Power Sliding Door Override Switch Input Ckt Short to Gnd

DTC B2367 meaning

DTC B2367 refers to a diagnostic trouble code indicating a problem with the power sliding door override switch input circuit. Specifically, it signifies that there is a short circuit to ground in the input circuit of the power sliding door override switch. This switch is responsible for controlling the operation of the power sliding doors in a vehicle, allowing them to be opened or closed automatically.

DTC B2367 symptoms

Common symptoms associated with DTC B2367 may include:

• Power sliding doors not functioning properly
• Inability to open or close the sliding doors using the switch
• Sliding doors may operate intermittently
• Warning lights on the dashboard related to door operation

DTC B2367 causes

Several factors can lead to the occurrence of DTC B2367, including:

• Faulty power sliding door override switch
• Wiring issues, such as damaged or frayed wires
• Corrosion or poor connections in the circuit
• Short circuit in the wiring harness
• Faulty body control module (BCM)

DTC B2367 seriousness

The seriousness of DTC B2367 can vary based on the symptoms experienced. While it may not pose an immediate safety risk, it can lead to:

• Inconvenience due to non-functional sliding doors
• Potential for further electrical issues if left unaddressed
• Increased repair costs if the problem worsens

How to diagnose DTC B2367

To diagnose DTC B2367, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the power sliding door override switch for physical damage.
3. Check the wiring and connectors for signs of wear, corrosion, or damage.
4. Test the continuity of the circuit to ensure there are no shorts to ground.
5. Examine the body control module for any faults or issues.

How to fix DTC B2367 step-by-step instructions

To fix DTC B2367, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and replace the power sliding door override switch if it is faulty.
3. Repair or replace any damaged wiring or connectors in the circuit.
4. Check for shorts in the wiring harness and correct any issues found.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the power sliding doors to ensure they operate correctly.

How to erase DTC B2367

To erase DTC B2367, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and start the vehicle to check if the code returns.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.