B2380 – OBD-II DTC

OBD-II DTC B2380 – Heater Coolant Temp sensor circuit Short to GND

DTC B2380 meaning

DTC B2380 refers to a diagnostic trouble code indicating a short circuit to ground in the heater coolant temperature sensor circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper operation. The heater coolant temperature sensor plays a crucial role in regulating engine temperature and providing data to the engine control module (ECM) for optimal performance.

DTC B2380 symptoms

When DTC B2380 is triggered, the following symptoms may be observed:

• Engine overheating or running too cool
• Inaccurate temperature gauge readings
• Check Engine Light illuminated
• Poor engine performance or fuel efficiency
• Potential issues with the heating system

DTC B2380 causes

Several factors can lead to the occurrence of DTC B2380, including:

• Faulty heater coolant temperature sensor
• Wiring issues, such as damaged or frayed wires
• Corrosion or poor connections in the sensor circuit
• Short circuit in the wiring harness
• Faulty engine control module (ECM)

DTC B2380 seriousness

DTC B2380 can be considered serious as it may lead to engine overheating or inefficient operation. If left unaddressed, it can result in significant engine damage or failure. It is essential to diagnose and repair the issue promptly to maintain vehicle performance and prevent further complications.

How to diagnose DTC B2380

To diagnose DTC B2380, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the heater coolant temperature sensor and its wiring for visible damage.
3. Check for continuity in the wiring harness and look for any shorts to ground.
4. Test the heater coolant temperature sensor with a multimeter to ensure it operates within specifications.
5. Examine the engine control module (ECM) for any faults or updates.

How to fix DTC B2380 step-by-step instructions

To fix DTC B2380, follow these step-by-step instructions:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the heater coolant temperature sensor circuit.
3. Replace the heater coolant temperature sensor if it is found to be faulty.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the engine and monitor the temperature readings to ensure proper operation.

How to erase DTC B2380

To erase DTC B2380, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the engine to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.