B2440 – OBD-II DTC

OBD-II DTC B2440 – Passenger Side – Side crash sensor mount fault

DTC B2440 meaning

DTC B2440 refers to a fault in the passenger side side crash sensor mount. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the mounting of the side crash sensor, which is crucial for the proper functioning of the airbag system during a collision. The side crash sensor is responsible for detecting impacts and triggering the deployment of airbags to protect occupants in the event of a side collision.

DTC B2440 symptoms

Common symptoms associated with DTC B2440 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the side airbags
• Increased risk of airbag failure during a side impact
• Diagnostic trouble code stored in the vehicle’s computer

DTC B2440 causes

Several factors can lead to the triggering of DTC B2440, including:

• Improper installation or damage to the side crash sensor mount
• Corrosion or poor electrical connections in the sensor wiring
• Faulty side crash sensor
• Accidental impact or collision affecting the sensor mount
• Software issues within the vehicle’s airbag control module

DTC B2440 seriousness

DTC B2440 is considered a serious issue as it directly impacts the safety features of the vehicle. If the side crash sensor is not functioning correctly, it may fail to deploy the airbags during a side collision, increasing the risk of injury to occupants. It is crucial to address this code promptly to ensure the airbag system operates as intended.

How to diagnose DTC B2440

To diagnose DTC B2440, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2440.
2. Inspect the passenger side crash sensor and its mount for any visible damage or misalignment.
3. Check the wiring and connectors for signs of corrosion, fraying, or loose connections.
4. Test the side crash sensor using a multimeter to ensure it is functioning within specifications.
5. Review the vehicle’s service history for any previous repairs related to the airbag system.
6. Clear the DTC and perform a road test to see if the code reappears.

How to fix DTC B2440 step-by-step instructions

To fix DTC B2440, follow these step-by-step instructions:

1. Ensure the vehicle is turned off and disconnect the battery to prevent accidental airbag deployment.
2. Inspect the side crash sensor mount for any damage or misalignment and repair or replace as necessary.
3. Examine the wiring and connectors for the side crash sensor, repairing any damaged wires or connections.
4. If the side crash sensor is faulty, replace it with a new one that meets manufacturer specifications.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a road test to verify that the airbag system is functioning correctly and that the DTC does not reappear.

How to erase DTC B2440

To erase DTC B2440, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the diagnostic trouble codes section of the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.