B2441 – OBD-II DTC

OBD-II DTC B2441 – Driver Side – Side crash sensor mount fault

DTC B2441 meaning

DTC B2441 refers to a fault in the driver side side crash sensor mount. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the mounting of the side crash sensor, which is crucial for the proper functioning of the airbag system during a collision. The side crash sensor is responsible for detecting impacts from the side and triggering the deployment of airbags to protect occupants.

DTC B2441 symptoms

Common symptoms associated with DTC B2441 may include:

• Illumination of the airbag warning light on the dashboard
• Possible malfunction of the side airbags
• Increased risk of airbag failure during a side impact
• Diagnostic trouble code stored in the vehicle’s computer

DTC B2441 causes

Several factors can lead to the occurrence of DTC B2441, including:

• Improper installation or damage to the side crash sensor
• Corrosion or poor electrical connections in the sensor wiring
• Physical damage to the sensor mount due to an accident or impact
• Faulty side crash sensor itself
• Issues with the vehicle’s airbag control module

DTC B2441 seriousness

DTC B2441 is considered serious because it directly affects the vehicle’s safety systems. If the side crash sensor is not functioning correctly, the airbags may not deploy in the event of a side collision, increasing the risk of injury to occupants. It is crucial to address this issue promptly to ensure the safety of all passengers.

How to diagnose DTC B2441

To diagnose DTC B2441, follow these steps:

1. Use an OBD-II scanner to retrieve the trouble code and any related codes.
2. Inspect the side crash sensor and its mounting for physical damage or misalignment.
3. Check the wiring and connectors for signs of corrosion, damage, or loose connections.
4. Test the side crash sensor using a multimeter to ensure it is functioning within specifications.
5. Examine the airbag control module for any faults or issues.

How to fix DTC B2441 step-by-step instructions

To fix DTC B2441, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the airbag system.
2. Inspect and repair or replace any damaged wiring or connectors associated with the side crash sensor.
3. If the side crash sensor is damaged or malfunctioning, replace it with a new one.
4. Ensure the side crash sensor is properly mounted and aligned according to manufacturer specifications.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the airbag system is functioning correctly and the warning light does not reappear.

How to erase DTC B2441

To erase DTC B2441, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the option to clear or erase trouble codes on the scanner.
4. Confirm the action to erase the DTC.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and check if the airbag warning light remains off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.