B2443 – OBD-II DTC

OBD-II DTC B2443 – Powertrain Performance Mode Switch Circuit failure

DTC B2443 meaning

DTC B2443 refers to a malfunction in the Powertrain Performance Mode Switch Circuit. This code indicates that the vehicle’s onboard diagnostic system has detected an issue with the circuit that controls the performance mode switch, which is responsible for altering the vehicle’s performance characteristics based on driver input.

DTC B2443 symptoms

Common symptoms associated with DTC B2443 may include:

• Illumination of the check engine light
• Inconsistent vehicle performance
• Difficulty in switching between performance modes
• Reduced engine power or responsiveness
• Unusual engine behavior or stalling

DTC B2443 causes

Several factors can lead to the triggering of DTC B2443, including:

• Faulty powertrain performance mode switch
• Wiring issues, such as shorts or open circuits
• Corroded or damaged connectors
• Faulty engine control module (ECM)
• Software issues within the vehicle’s control systems

DTC B2443 seriousness

The seriousness of DTC B2443 can vary based on the symptoms experienced. While it may not immediately affect the vehicle’s safety, it can lead to:

• Decreased performance and drivability
• Increased emissions
• Potential for further damage to the engine or transmission if not addressed

It is advisable to diagnose and repair the issue promptly to maintain optimal vehicle performance.

How to diagnose DTC B2443

To diagnose DTC B2443, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the powertrain performance mode switch for physical damage or wear.
3. Check the wiring and connectors for signs of corrosion or damage.
4. Test the switch operation using a multimeter to ensure it is functioning correctly.
5. Examine the engine control module for any software updates or faults.
6. Clear the DTC and perform a road test to see if the code returns.

How to fix DTC B2443 step-by-step instructions

To fix DTC B2443, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and replace the powertrain performance mode switch if it is faulty.
3. Repair or replace any damaged wiring or connectors associated with the switch.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Perform a road test to verify that the issue has been resolved and the DTC does not return.

How to erase DTC B2443

To erase DTC B2443, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the check engine light is off.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.