B2448 – OBD-II DTC

OBD-II DTC B2448 – RESCU/VEMS Input Circuit Short to Ground

DTC B2448 meaning

DTC B2448 refers to a diagnostic trouble code indicating a short to ground in the RESCU/VEMS input circuit. This code is specific to the vehicle’s body control module and is related to the communication between the RESCU (Rescue) system and the Vehicle Engine Management System (VEMS). A short to ground means that the electrical signal intended for the RESCU/VEMS input circuit is being interrupted or altered due to an unintended connection to the ground, which can lead to improper functioning of safety features.

DTC B2448 symptoms

Common symptoms associated with DTC B2448 may include:

• Warning lights on the dashboard, particularly related to safety systems.
• Malfunctioning of the RESCU system, which may affect emergency response features.
• Inconsistent or erratic behavior of the vehicle’s electrical systems.
• Potential failure of other related systems that rely on the RESCU/VEMS input.

DTC B2448 causes

Several factors can lead to the occurrence of DTC B2448, including:

• Wiring issues, such as frayed or damaged wires in the RESCU/VEMS input circuit.
• Corrosion or poor connections at the connectors associated with the RESCU system.
• Faulty components within the RESCU or VEMS systems.
• Moisture intrusion or environmental factors affecting the electrical connections.

DTC B2448 seriousness

The seriousness of DTC B2448 can vary based on the vehicle’s design and the specific systems affected. However, it is generally considered a moderate to high severity issue due to its potential impact on safety features. If left unaddressed, it may lead to compromised vehicle safety systems, which could affect the vehicle’s performance in emergency situations.

How to diagnose DTC B2448

To diagnose DTC B2448, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC and check for any additional codes.
2. Inspect the wiring and connectors associated with the RESCU/VEMS input circuit for visible damage or corrosion.
3. Perform a continuity test on the wiring to ensure there are no breaks or shorts.
4. Check the ground connections to ensure they are secure and free of corrosion.
5. Test the RESCU and VEMS components for proper functionality using manufacturer specifications.

How to fix DTC B2448 step-by-step instructions

To fix DTC B2448, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the RESCU/VEMS input circuit.
3. Clean any corroded connections and ensure all connectors are securely attached.
4. Replace any faulty components identified during the diagnosis, such as the RESCU or VEMS units.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test drive the vehicle to ensure the issue is resolved and the DTC does not reappear.

How to erase DTC B2448

To erase DTC B2448, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to erase or clear codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the DTC has been cleared.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.