B2450 – OBD-II DTC

OBD-II DTC B2450 – Aux Heater Glow Plug Circuit Open

DTC B2450 meaning

DTC B2450 refers to a diagnostic trouble code indicating an issue with the auxiliary heater glow plug circuit. Specifically, it signifies that the circuit is open, meaning there is a break in the electrical path that prevents the glow plug from receiving power. This can affect the performance of the auxiliary heater, which is crucial for starting the engine in cold conditions and maintaining optimal engine temperature.

DTC B2450 symptoms

Common symptoms associated with DTC B2450 may include:

• Engine hard to start, especially in cold weather
• Increased engine cranking time
• Reduced cabin heating efficiency
• Check Engine Light illuminated
• Possible engine misfires or rough idling

DTC B2450 causes

Several factors can lead to the occurrence of DTC B2450, including:

• Faulty glow plug
• Open or damaged wiring in the glow plug circuit
• Defective glow plug relay
• Corroded or loose electrical connections
• Faulty engine control module (ECM)

DTC B2450 seriousness

DTC B2450 is considered a moderate to serious issue. While it may not cause immediate engine failure, it can lead to starting difficulties, especially in colder climates. Additionally, prolonged operation with this code can result in further engine performance issues and increased wear on engine components.

How to diagnose DTC B2450

To diagnose DTC B2450, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the glow plug and its wiring for any visible damage or corrosion.
3. Check the glow plug relay for proper operation.
4. Test the electrical connections for continuity and proper voltage.
5. Perform a resistance test on the glow plug to ensure it is functioning correctly.
6. Examine the ECM for any faults or updates that may be necessary.

How to fix DTC B2450 step-by-step instructions

To fix DTC B2450, follow these steps:

1. Disconnect the battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the glow plug circuit.
3. Replace the faulty glow plug if it fails the resistance test.
4. Test and replace the glow plug relay if it is not functioning properly.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Start the engine and monitor for any reoccurrence of the code.

How to erase DTC B2450

To erase DTC B2450, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the engine to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.