B2461 – OBD-II DTC

OBD-II DTC B2461 – Aux Heater Flame Sensor Circuit Open

DTC B2461 meaning

DTC B2461 refers to an issue with the Auxiliary Heater Flame Sensor Circuit, indicating that the circuit is open. This means that the vehicle’s onboard diagnostic system has detected a break or fault in the electrical circuit that monitors the flame sensor of the auxiliary heater. The auxiliary heater is responsible for providing additional heat to the cabin, especially in cold weather conditions.

DTC B2461 symptoms

Common symptoms associated with DTC B2461 may include:

• Inoperative auxiliary heater
• Reduced cabin heating performance
• Dashboard warning lights illuminated
• Increased fuel consumption due to reliance on the main heater

DTC B2461 causes

The causes of DTC B2461 can vary, but typical reasons include:

• Open circuit in the flame sensor wiring
• Faulty flame sensor
• Corroded or damaged connectors
• Issues with the auxiliary heater control module
• Short circuits or grounding issues in the circuit

DTC B2461 seriousness

DTC B2461 is considered a moderate issue. While it may not immediately affect the vehicle’s drivability, it can lead to inadequate cabin heating, especially in colder climates. Prolonged neglect of this issue may result in further complications or damage to the auxiliary heating system.

How to diagnose DTC B2461

To diagnose DTC B2461, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2461.
2. Inspect the wiring and connectors associated with the flame sensor for any visible damage or corrosion.
3. Check the resistance of the flame sensor using a multimeter to ensure it is within specifications.
4. Test the auxiliary heater control module for proper operation.
5. Look for any additional DTCs that may provide more context to the issue.

How to fix DTC B2461 step-by-step instructions

To fix DTC B2461, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors related to the flame sensor.
3. If the flame sensor is faulty, replace it with a new one.
4. Reconnect the battery and clear the DTC using an OBD-II scanner.
5. Start the vehicle and monitor the auxiliary heater operation to ensure the issue is resolved.

How to erase DTC B2461

To erase DTC B2461, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner and select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the DTC does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.