B2462 – OBD-II DTC

OBD-II DTC B2462 – Aux Heater Flame Out Fault

DTC B2462 meaning

DTC B2462 refers to an “Aux Heater Flame Out Fault.” This diagnostic trouble code indicates that the auxiliary heater, which is used to provide additional heat to the vehicle’s cabin, has experienced a failure in its combustion process. This can lead to insufficient heating and may affect the overall performance of the vehicle’s heating system.

DTC B2462 symptoms

Common symptoms associated with DTC B2462 may include:

• Inadequate cabin heating
• Auxiliary heater not functioning
• Warning lights illuminated on the dashboard
• Unusual noises from the auxiliary heater
• Increased fuel consumption

DTC B2462 causes

Several factors can contribute to the occurrence of DTC B2462, including:

• Faulty auxiliary heater components
• Blocked or restricted exhaust system
• Insufficient fuel supply to the heater
• Electrical issues, such as wiring faults or poor connections
• Faulty control module or sensors

DTC B2462 seriousness

The seriousness of DTC B2462 can vary based on the vehicle’s use and climate conditions. While it may not pose an immediate safety risk, it can lead to:

• Discomfort for passengers in cold weather
• Potential damage to the auxiliary heater if left unaddressed
• Increased wear on the vehicle’s primary heating system

How to diagnose DTC B2462

To diagnose DTC B2462, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Check for any additional trouble codes that may provide more context.
3. Inspect the auxiliary heater for visible damage or blockages.
4. Test the fuel supply to the auxiliary heater.
5. Examine electrical connections and wiring for faults.
6. Check the operation of the control module and related sensors.

How to fix DTC B2462 step-by-step instructions

To fix DTC B2462, follow these steps:

1. Address any identified blockages in the exhaust system.
2. Replace any faulty components in the auxiliary heater.
3. Repair or replace damaged wiring and connectors.
4. Ensure proper fuel supply to the heater.
5. Reprogram or replace the control module if necessary.
6. Clear the DTC using an OBD-II scanner and test the system.

How to erase DTC B2462

To erase DTC B2462, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to check for reoccurrence of the code.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.