B2464 – OBD-II DTC

OBD-II DTC B2464 – Aux Heater Start Time Exceeded

DTC B2464 meaning

DTC B2464 refers to an issue with the auxiliary heater in a vehicle, specifically indicating that the start time for the auxiliary heater has exceeded the expected limit. This diagnostic trouble code (DTC) is part of the On-Board Diagnostics II (OBD-II) system, which monitors various components and systems within the vehicle for proper operation.

DTC B2464 symptoms

Common symptoms associated with DTC B2464 may include:

• Increased engine warm-up time
• Inconsistent cabin heating
• Auxiliary heater not functioning
• Check Engine Light (CEL) illuminated

DTC B2464 causes

Several factors can lead to the triggering of DTC B2464, including:

• Faulty auxiliary heater control module
• Wiring issues or poor connections in the auxiliary heater circuit
• Defective temperature sensors
• Insufficient fuel supply to the auxiliary heater
• Blocked exhaust or intake for the auxiliary heater

DTC B2464 seriousness

The seriousness of DTC B2464 can vary depending on the vehicle’s reliance on the auxiliary heater for proper operation. While it may not cause immediate safety concerns, it can lead to:

• Reduced cabin comfort during cold weather
• Increased engine wear due to prolonged warm-up times
• Potential for further damage to the auxiliary heater system if left unaddressed

How to diagnose DTC B2464

To diagnose DTC B2464, follow these steps:

1. Use an OBD-II scanner to confirm the presence of DTC B2464.
2. Inspect the auxiliary heater system for visible damage or loose connections.
3. Check the auxiliary heater control module for proper operation.
4. Test the temperature sensors for accurate readings.
5. Examine the fuel supply to the auxiliary heater.
6. Perform a functional test of the auxiliary heater to see if it operates within specifications.

How to fix DTC B2464 step-by-step instructions

To fix DTC B2464, follow these step-by-step instructions:

1. Clear the DTC using an OBD-II scanner.
2. Inspect and repair any damaged wiring or connectors in the auxiliary heater circuit.
3. Replace any faulty temperature sensors.
4. Ensure the fuel supply to the auxiliary heater is adequate and free of blockages.
5. Test the auxiliary heater control module and replace it if necessary.
6. Recheck the system for any new DTCs after repairs.

How to erase DTC B2464

To erase DTC B2464, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the DTC menu on the scanner and locate DTC B2464.
4. Select the option to erase or clear the DTC.
5. Turn off the ignition and disconnect the scanner.
6. Start the vehicle and monitor for any reoccurrence of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.