B2487 – OBD-II DTC

OBD-II DTC B2487 – RF SIDE REPEATER LAMP OUTPUT Ckt Short to Battery

DTC B2487 meaning

DTC B2487 refers to a diagnostic trouble code indicating a short circuit in the right front side repeater lamp output circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The right front side repeater lamp is responsible for signaling to other drivers when the vehicle is turning or changing lanes. A short to battery means that the circuit is receiving constant voltage, which can lead to malfunctioning of the lamp.

DTC B2487 symptoms

Common symptoms associated with DTC B2487 may include:

• Right front side repeater lamp not functioning
• Illumination of the check engine light
• Possible flickering or dimming of the lamp
• Other related warning lights on the dashboard

DTC B2487 causes

Several factors can lead to the occurrence of DTC B2487, including:

• Wiring issues such as frayed or damaged wires
• Corrosion or poor connections in the circuit
• Faulty right front side repeater lamp
• Short circuit in the lamp assembly or connector
• Malfunctioning body control module (BCM)

DTC B2487 seriousness

The seriousness of DTC B2487 can vary. While it may not immediately affect the vehicle’s drivability, it can compromise safety by reducing visibility to other drivers. It is important to address this issue promptly to ensure that all signaling devices are functioning correctly.

How to diagnose DTC B2487

To diagnose DTC B2487, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the right front side repeater lamp and its wiring for visible damage.
3. Check for corrosion or loose connections in the circuit.
4. Test the voltage at the lamp connector to determine if it is receiving constant power.
5. Perform a continuity test on the wiring to check for shorts.
6. Examine the body control module for any faults or issues.

How to fix DTC B2487 step-by-step instructions

To fix DTC B2487, follow these steps:

1. Repair or replace any damaged wiring or connectors found during diagnosis.
2. Replace the right front side repeater lamp if it is faulty.
3. Clean any corrosion from connectors and ensure tight connections.
4. If necessary, reprogram or replace the body control module.
5. Clear the DTC using an OBD-II scanner.
6. Test the system by turning on the vehicle and checking the operation of the right front side repeater lamp.

How to erase DTC B2487

To erase DTC B2487, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.