B2493 – OBD-II DTC

OBD-II DTC B2493 – LF PARK LAMP OUTPUT CIRCUIT Short to Battery

DTC B2493 meaning

DTC B2493 refers to a diagnostic trouble code indicating a short circuit in the left front park lamp output circuit. This code is triggered when the vehicle’s onboard diagnostic system detects that the voltage in the left front park lamp circuit is higher than expected, suggesting a direct connection to the battery voltage.

DTC B2493 symptoms

Common symptoms associated with DTC B2493 may include:

• Left front park lamp not functioning
• Illumination of the check engine light or warning indicators
• Possible malfunction of other lighting systems
• Inconsistent operation of the vehicle’s electrical systems

DTC B2493 causes

Several factors can lead to the triggering of DTC B2493, including:

• Short circuit in the wiring harness
• Faulty left front park lamp bulb
• Corroded or damaged connectors
• Defective body control module (BCM)
• Improper installation of aftermarket lighting components

DTC B2493 seriousness

DTC B2493 is considered a moderate issue. While it may not immediately affect the drivability of the vehicle, it can lead to safety concerns due to non-functioning lights. Addressing this code promptly is important to ensure all lighting systems are operational and to prevent further electrical issues.

How to diagnose DTC B2493

To diagnose DTC B2493, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the left front park lamp bulb for damage or failure.
3. Check the wiring harness for signs of wear, fraying, or short circuits.
4. Examine connectors for corrosion or loose connections.
5. Test the voltage at the left front park lamp circuit to determine if it is receiving proper voltage.
6. Inspect the body control module for faults or failures.

How to fix DTC B2493 step-by-step instructions

To fix DTC B2493, follow these steps:

1. Replace the left front park lamp bulb if it is faulty.
2. Repair or replace any damaged wiring in the harness.
3. Clean or replace corroded connectors to ensure a good electrical connection.
4. If the body control module is found to be defective, replace it with a new unit.
5. Recheck the circuit for proper voltage and functionality after repairs.
6. Clear the DTC using an OBD-II scanner and test the vehicle to ensure the code does not return.

How to erase DTC B2493

To erase DTC B2493, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “On” position without starting the engine.
3. Access the scanner’s menu and select the option to clear or erase trouble codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.