B2504 – OBD-II DTC

OBD-II DTC B2504 – RF LAMP LOW BEAM CIRCUIT Short to Battery

DTC B2504 meaning

DTC B2504 refers to a diagnostic trouble code indicating a problem in the RF (Right Front) low beam circuit. Specifically, it signifies a short to battery condition, meaning that the circuit is receiving an unintended voltage from the battery, which can lead to improper functioning of the low beam headlight.

DTC B2504 symptoms

Common symptoms associated with DTC B2504 may include:

• Right front low beam headlight not functioning
• Headlight flickering or dimming
• Dashboard warning lights illuminated
• Increased electrical load on the vehicle’s battery

DTC B2504 causes

Several factors can lead to the occurrence of DTC B2504, including:

• Wiring issues such as frayed or damaged wires
• Faulty connectors or terminals
• Short circuits in the headlight assembly
• Defective headlight bulb
• Malfunctioning body control module (BCM)

DTC B2504 seriousness

DTC B2504 is considered a serious issue as it affects the vehicle’s visibility during nighttime driving. If left unaddressed, it can lead to further electrical problems and may compromise safety on the road.

How to diagnose DTC B2504

To diagnose DTC B2504, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the wiring and connectors related to the right front low beam circuit for any visible damage.
3. Check the headlight bulb for proper operation.
4. Test the voltage at the headlight connector to determine if there is an unintended voltage present.
5. Examine the body control module for any faults or issues.

How to fix DTC B2504 step-by-step instructions

To fix DTC B2504, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the right front low beam circuit.
3. Replace the headlight bulb if it is found to be defective.
4. Test the circuit for proper voltage and continuity after repairs.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to ensure the low beam headlight functions correctly and the code does not return.

How to erase DTC B2504

To erase DTC B2504, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.