B2505 – OBD-II DTC

OBD-II DTC B2505 – LF LAMP HIGH BEAM CIRCUIT Failure

DTC B2505 meaning

DTC B2505 refers to a fault in the Left Front Lamp High Beam Circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the high beam lighting circuit on the left side of the vehicle. The high beam lights are essential for providing increased visibility during nighttime driving or in low-light conditions.

DTC B2505 symptoms

Common symptoms associated with DTC B2505 may include:

• Left front high beam light not functioning
• Dashboard warning lights illuminated
• Inconsistent operation of the high beam lights
• Possible flickering of the left front high beam light

DTC B2505 causes

Several factors can lead to the triggering of DTC B2505, including:

• Faulty left front high beam bulb
• Damaged wiring or connectors in the high beam circuit
• Malfunctioning headlight switch or relay
• Issues with the body control module (BCM)

DTC B2505 seriousness

DTC B2505 can be considered serious due to the potential safety risks associated with non-functional high beam lights. Driving without proper illumination can lead to reduced visibility and increase the likelihood of accidents, especially in dark or poorly lit areas. It is advisable to address this issue promptly.

How to diagnose DTC B2505

To diagnose DTC B2505, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2505 code.
2. Inspect the left front high beam bulb for any signs of damage or failure.
3. Check the wiring and connectors for any visible damage or corrosion.
4. Test the headlight switch and relay for proper operation.
5. Examine the body control module for any faults or issues.

How to fix DTC B2505 step-by-step instructions

To fix DTC B2505, follow these step-by-step instructions:

1. Replace the left front high beam bulb if it is found to be faulty.
2. Repair or replace any damaged wiring or connectors in the high beam circuit.
3. Test and replace the headlight switch or relay if they are malfunctioning.
4. Reprogram or replace the body control module if it is determined to be faulty.
5. Clear the DTC using an OBD-II scanner and test the high beam lights to ensure proper operation.

How to erase DTC B2505

To erase DTC B2505, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.