B2506 – OBD-II DTC

OBD-II DTC B2506 – LF LAMP HIGH BEAM CIRCUIT Short to Battery

DTC B2506 meaning

DTC B2506 refers to a diagnostic trouble code indicating a problem in the left front lamp high beam circuit. Specifically, it signifies a short circuit to battery voltage, meaning that the circuit is receiving more voltage than it should, which can lead to improper functioning of the high beam lights.

DTC B2506 symptoms

Common symptoms associated with DTC B2506 may include:

• Left front high beam light not functioning
• Left front high beam light staying on continuously
• Dashboard warning lights illuminated
• Possible flickering of the left front high beam light

DTC B2506 causes

Several factors can lead to the occurrence of DTC B2506, including:

• Wiring issues such as frayed or damaged wires
• Faulty high beam bulb or socket
• Corrosion in the electrical connectors
• Short circuit in the high beam circuit
• Malfunctioning body control module (BCM)

DTC B2506 seriousness

DTC B2506 is considered a moderate to serious issue. While it may not immediately affect the vehicle’s drivability, it can compromise visibility during nighttime driving or adverse weather conditions. Additionally, it may lead to further electrical problems if not addressed promptly.

How to diagnose DTC B2506

To diagnose DTC B2506, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the left front high beam bulb and socket for damage.
3. Check the wiring harness for any signs of wear, fraying, or corrosion.
4. Test the voltage at the high beam connector to ensure it is within specifications.
5. Examine the body control module for any faults or issues.

How to fix DTC B2506 step-by-step instructions

To fix DTC B2506, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and replace the left front high beam bulb if it is faulty.
3. Repair or replace any damaged wiring or connectors in the high beam circuit.
4. Clean any corrosion found in the electrical connectors.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the left front high beam to ensure it operates correctly.

How to erase DTC B2506

To erase DTC B2506, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the ignition without starting the engine.
3. Navigate to the DTC menu on the scanner.
4. Select the option to clear or erase the trouble codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.