B2507 – OBD-II DTC

OBD-II DTC B2507 – RF LAMP HIGH BEAM CIRCUIT Failure

DTC B2507 meaning

DTC B2507 refers to a fault in the RF (Right Front) lamp high beam circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the high beam lighting circuit on the right front side. The code is part of the OBD-II system, which monitors various vehicle components to ensure they are functioning correctly.

DTC B2507 symptoms

Common symptoms associated with DTC B2507 may include:

• Right front high beam light not functioning
• Dashboard warning lights illuminated
• Inconsistent high beam operation
• Possible flickering of the right front high beam

DTC B2507 causes

Several factors can lead to the triggering of DTC B2507, including:

• Faulty high beam bulb
• Damaged wiring or connectors in the high beam circuit
• Defective headlight relay
• Issues with the body control module (BCM)
• Corrosion or poor connections in the electrical system

DTC B2507 seriousness

DTC B2507 can be considered a moderate to serious issue, primarily because it affects the vehicle’s lighting system. Proper functioning of high beams is crucial for safe driving, especially in low-light conditions. If left unaddressed, it may lead to reduced visibility and increase the risk of accidents.

How to diagnose DTC B2507

To diagnose DTC B2507, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2507 code.
2. Inspect the right front high beam bulb for any signs of damage or failure.
3. Check the wiring and connectors for any visible damage or corrosion.
4. Test the headlight relay for proper operation.
5. Examine the body control module for any faults or issues.
6. Clear the code and perform a road test to see if the code returns.

How to fix DTC B2507 step-by-step instructions

To fix DTC B2507, follow these step-by-step instructions:

1. Replace the right front high beam bulb if it is found to be faulty.
2. Repair or replace any damaged wiring or connectors in the high beam circuit.
3. Replace the headlight relay if it is not functioning correctly.
4. Reprogram or replace the body control module if necessary.
5. Ensure all connections are clean and secure to prevent future issues.
6. Clear the DTC using an OBD-II scanner and perform a road test to confirm the fix.

How to erase DTC B2507

To erase DTC B2507, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Access the diagnostic trouble codes menu on the scanner.
4. Select the option to clear or erase codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.