OBD-II DTC B2519 – High Mount Stop Lamp Circuit Failure
DTC B2519 meaning
DTC B2519 refers to a fault in the High Mount Stop Lamp Circuit. This diagnostic trouble code indicates that there is an issue with the circuit responsible for the high mount brake light, which is typically located at the rear of the vehicle above the rear window. The code is set when the Engine Control Module (ECM) detects a malfunction in the circuit, which may affect the operation of the high mount stop lamp.
DTC B2519 symptoms
Common symptoms associated with DTC B2519 may include:
- High mount stop lamp not illuminating when brakes are applied
- Illumination of the check engine light or warning indicator on the dashboard
- Possible malfunction of other brake lights
- Inconsistent operation of the high mount stop lamp
DTC B2519 causes
Several factors can lead to the triggering of DTC B2519, including:
- Faulty high mount stop lamp bulb
- Damaged or corroded wiring in the circuit
- Defective brake light switch
- Issues with the ECM or its programming
- Bad ground connection in the circuit
DTC B2519 seriousness
The seriousness of DTC B2519 can vary. While it may not immediately affect the drivability of the vehicle, it poses a safety risk as the high mount stop lamp is an important indicator for other drivers. If the high mount stop lamp is not functioning, it may lead to misunderstandings on the road, increasing the risk of rear-end collisions.
How to diagnose DTC B2519
To diagnose DTC B2519, follow these steps:
- Use an OBD-II scanner to confirm the presence of the code.
- Inspect the high mount stop lamp bulb for any signs of damage or failure.
- Check the wiring and connectors for corrosion, damage, or loose connections.
- Test the brake light switch to ensure it is functioning correctly.
- Examine the ground connections for continuity and integrity.
- Perform a visual inspection of the ECM and its connections.
How to fix DTC B2519 step-by-step instructions
To fix DTC B2519, follow these step-by-step instructions:
- Replace the high mount stop lamp bulb if it is burnt out or damaged.
- Repair or replace any damaged wiring or connectors in the circuit.
- Replace the brake light switch if it is found to be faulty.
- Ensure all ground connections are clean and secure.
- Recheck the circuit for continuity after repairs.
- Clear the DTC using an OBD-II scanner and test the high mount stop lamp operation.
How to erase DTC B2519
To erase DTC B2519, follow these steps:
- Connect an OBD-II scanner to the vehicle’s diagnostic port.
- Turn the ignition key to the “ON” position without starting the engine.
- Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
- Confirm the action to clear the trouble codes.
- Disconnect the scanner and start the vehicle to ensure the code does not return.
Recommended tools for OBD-II diagnostics
Explore our expert picks: The Best OBD2 Scanners for 2025
Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter
Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.