B2523 – OBD-II DTC

OBD-II DTC B2523 – License Lamp Circuit Failure

DTC B2523 meaning

DTC B2523 refers to a fault in the license lamp circuit. This diagnostic trouble code indicates that the vehicle’s onboard diagnostic system has detected an issue with the operation of the license plate lights. The license lamp is essential for ensuring that the vehicle is visible from behind, especially at night or in low-light conditions.

DTC B2523 symptoms

Common symptoms associated with DTC B2523 may include:

• License plate lights not functioning
• Illumination of the check engine light or warning indicator on the dashboard
• Possible issues with other lighting systems, such as tail lights

DTC B2523 causes

Several factors can lead to the triggering of DTC B2523, including:

• Burnt out license plate bulbs
• Faulty wiring or connections in the license lamp circuit
• Defective body control module (BCM)
• Corrosion or damage at the bulb socket
• Issues with the vehicle’s electrical system

DTC B2523 seriousness

The seriousness of DTC B2523 can vary. While it may not affect the vehicle’s drivability, it is important for safety and legal reasons to have functioning license plate lights. Driving without proper illumination can lead to traffic violations and increased risk of accidents, especially in low visibility conditions.

How to diagnose DTC B2523

To diagnose DTC B2523, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the DTC.
2. Inspect the license plate bulbs for any signs of damage or burnout.
3. Check the wiring and connectors for corrosion, breaks, or loose connections.
4. Test the voltage at the license lamp circuit using a multimeter.
5. Examine the body control module for any faults or issues.

How to fix DTC B2523 step-by-step instructions

To fix DTC B2523, follow these steps:

1. Replace any burnt out license plate bulbs with new ones.
2. Repair or replace any damaged wiring or connectors in the circuit.
3. Clean any corrosion found at the bulb socket or connectors.
4. If the body control module is faulty, consider reprogramming or replacing it.
5. After repairs, recheck the circuit for proper voltage and functionality.

How to erase DTC B2523

To erase DTC B2523 from the vehicle’s memory, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Access the trouble codes menu on the scanner.
3. Select the option to clear or erase codes.
4. Confirm the action and wait for the scanner to complete the process.
5. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.