B2527 – OBD-II DTC

OBD-II DTC B2527 – Left Rear Stop lamp Circuit Failure

DTC B2527 meaning

DTC B2527 refers to a diagnostic trouble code indicating a failure in the left rear stop lamp circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components to ensure proper functionality. When the vehicle’s control module detects an issue with the left rear stop lamp circuit, it triggers this specific code, alerting the technician to investigate further.

DTC B2527 symptoms

Common symptoms associated with DTC B2527 may include:

• Left rear stop lamp not functioning
• Illumination of the check engine light
• Other rear lights may work normally
• Possible issues with brake light operation

DTC B2527 causes

Several factors can lead to the triggering of DTC B2527, including:

• Burnt out left rear stop lamp bulb
• Faulty wiring or connectors in the stop lamp circuit
• Defective brake light switch
• Issues with the vehicle’s body control module (BCM)

DTC B2527 seriousness

DTC B2527 is considered a moderate issue. While it may not immediately affect the vehicle’s drivability, it poses a safety risk due to the malfunctioning stop lamp. This can lead to reduced visibility to other drivers, increasing the likelihood of accidents. Therefore, it is important to address this code promptly.

How to diagnose DTC B2527

To diagnose DTC B2527, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the left rear stop lamp bulb for any signs of damage or burnout.
3. Check the wiring and connectors for any visible damage or corrosion.
4. Test the brake light switch for proper operation.
5. Examine the body control module for any faults or issues.

How to fix DTC B2527 step-by-step instructions

To fix DTC B2527, follow these steps:

1. Replace the left rear stop lamp bulb if it is burnt out.
2. Repair or replace any damaged wiring or connectors in the stop lamp circuit.
3. Test and replace the brake light switch if it is found to be defective.
4. If necessary, reprogram or replace the body control module.
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B2527

To erase DTC B2527, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.