B2536 – OBD-II DTC

OBD-II DTC B2536 – Right Rear Turn Lamp Circuit Short to Battery

DTC B2536 meaning

DTC B2536 refers to a diagnostic trouble code indicating a short circuit in the right rear turn lamp circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. When the vehicle’s control module detects that the right rear turn lamp circuit is receiving an unexpected voltage level, it triggers this code to alert the technician of a potential electrical issue.

DTC B2536 symptoms

Common symptoms associated with DTC B2536 may include:

• Right rear turn signal not functioning
• Turn signal indicator on the dashboard may remain illuminated
• Possible blown fuse related to the turn signal circuit
• Inconsistent operation of the turn signal lights

DTC B2536 causes

Several factors can lead to the triggering of DTC B2536, including:

• Short circuit in the wiring harness or connectors
• Faulty turn signal bulb or socket
• Corrosion or damage in the electrical connections
• Malfunctioning body control module (BCM)

DTC B2536 seriousness

The seriousness of DTC B2536 can vary. While it may not immediately affect the vehicle’s drivability, it poses a safety risk due to the malfunctioning turn signal. This can lead to miscommunication with other drivers, increasing the likelihood of accidents. Therefore, it is advisable to address this issue promptly.

How to diagnose DTC B2536

To diagnose DTC B2536, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the code.
2. Inspect the right rear turn lamp and its socket for any visible damage or corrosion.
3. Check the wiring harness for signs of wear, fraying, or short circuits.
4. Test the turn signal bulb to ensure it is functioning correctly.
5. Examine the related fuses and replace any that are blown.
6. Use a multimeter to check for proper voltage and continuity in the circuit.
7. Inspect the body control module for any faults or issues.

How to fix DTC B2536 step-by-step instructions

To fix DTC B2536, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Remove the right rear turn lamp assembly and inspect the bulb and socket for damage.
3. Replace the turn signal bulb if it is burnt out or damaged.
4. Clean any corrosion from the socket and connectors using electrical contact cleaner.
5. Inspect the wiring harness for any signs of damage or short circuits and repair as necessary.
6. Check and replace any blown fuses related to the turn signal circuit.
7. Reconnect the battery and clear the DTC using an OBD-II scanner.
8. Test the right rear turn signal to ensure it is functioning correctly.

How to erase DTC B2536

To erase DTC B2536, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes from the vehicle’s memory.
5. Disconnect the scanner and start the vehicle to ensure the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.