B2554 – OBD-II DTC

OBD-II DTC B2554 – LAMP DOME OUTPUT Circuit Failure

DTC B2554 meaning

DTC B2554 refers to a diagnostic trouble code indicating a failure in the dome lamp output circuit. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle components and systems for faults. The dome lamp is typically controlled by the body control module (BCM), and this code suggests that there is an issue with the circuit that powers the dome light.

DTC B2554 symptoms

Common symptoms associated with DTC B2554 may include:

• Dome light not functioning or flickering
• Interior lights not turning on when doors are opened
• Inconsistent operation of the dome light
• Other interior lighting issues

DTC B2554 causes

Several factors can lead to the triggering of DTC B2554, including:

• Faulty body control module (BCM)
• Open or shorted wiring in the dome lamp circuit
• Defective dome lamp or bulb
• Corrosion or poor connections in the circuit
• Issues with the vehicle’s battery or electrical system

DTC B2554 seriousness

The seriousness of DTC B2554 can vary. While it may not affect the vehicle’s drivability, it can lead to safety concerns due to inadequate interior lighting. Additionally, it may indicate underlying electrical issues that could affect other systems in the vehicle. Therefore, it is advisable to address this code promptly.

How to diagnose DTC B2554

To diagnose DTC B2554, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2554 code.
2. Inspect the dome lamp and its bulb for any visible damage or failure.
3. Check the wiring and connectors in the dome lamp circuit for signs of wear, corrosion, or disconnection.
4. Test the body control module (BCM) for proper operation and communication.
5. Perform a continuity test on the circuit to identify any open or shorted wires.

How to fix DTC B2554 step-by-step instructions

To fix DTC B2554, follow these step-by-step instructions:

1. Replace any faulty dome lamp or bulb if found defective.
2. Repair or replace damaged wiring or connectors in the dome lamp circuit.
3. Ensure all connections are clean and secure, addressing any corrosion issues.
4. If the BCM is faulty, consider reprogramming or replacing it as necessary.
5. Clear the DTC using an OBD-II scanner and test the system to ensure the issue is resolved.

How to erase DTC B2554

To erase DTC B2554, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn the ignition key to the “ON” position without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble code from the vehicle’s memory.
5. Disconnect the scanner and start the vehicle to verify that the code does not reappear.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.