B2555 – OBD-II DTC

OBD-II DTC B2555 – LAMP DOME OUTPUT Circuit Short to Battery

DTC B2555 meaning

DTC B2555 refers to a diagnostic trouble code indicating a short circuit in the dome lamp output circuit to the battery. This code is part of the On-Board Diagnostics II (OBD-II) system, which monitors various vehicle systems for faults. When the vehicle’s control module detects that the dome lamp circuit is receiving an unexpected voltage level, it triggers this code.

DTC B2555 symptoms

Common symptoms associated with DTC B2555 may include:

• Dome lights remaining on continuously
• Dome lights not functioning at all
• Battery drain due to constant power draw
• Illumination of the check engine light or other warning lights

DTC B2555 causes

Several factors can lead to the triggering of DTC B2555, including:

• Short circuit in the dome lamp wiring
• Faulty dome lamp switch
• Defective body control module (BCM)
• Corroded or damaged connectors in the dome lamp circuit
• Incorrectly installed or malfunctioning aftermarket accessories

DTC B2555 seriousness

The seriousness of DTC B2555 can vary. While it may not immediately affect vehicle drivability, it can lead to:

• Increased battery drain, potentially leading to a dead battery
• Inconvenience due to malfunctioning interior lighting
• Potential for further electrical issues if not addressed

How to diagnose DTC B2555

To diagnose DTC B2555, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2555 code.
2. Inspect the dome lamp circuit wiring for visible damage or corrosion.
3. Check the dome lamp switch for proper operation.
4. Test the voltage at the dome lamp connector to ensure it is within specifications.
5. Examine the body control module for faults or issues.

How to fix DTC B2555 step-by-step instructions

To fix DTC B2555, follow these steps:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect and repair any damaged wiring or connectors in the dome lamp circuit.
3. Replace the dome lamp switch if it is found to be faulty.
4. If necessary, replace the body control module.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Test the dome lamp operation to ensure proper functionality.

How to erase DTC B2555

To erase DTC B2555, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to complete the process.
6. Disconnect the scanner and start the vehicle to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.