B2562 – OBD-II DTC

OBD-II DTC B2562 – Aux A/C Blower Speed 1 Circuit Short to Ground

DTC B2562 meaning

DTC B2562 refers to a diagnostic trouble code indicating a problem with the Auxiliary A/C Blower Speed 1 Circuit. Specifically, it signifies that there is a short to ground in the circuit responsible for controlling the first speed setting of the auxiliary air conditioning blower. This issue can affect the performance of the vehicle’s air conditioning system, leading to inadequate cooling or airflow.

DTC B2562 symptoms

Common symptoms associated with DTC B2562 may include:

• Inoperative auxiliary A/C blower at speed 1
• Reduced airflow from the auxiliary A/C system
• Unusual noises from the blower motor
• Possible overheating of the blower motor
• Other blower speeds may function normally

DTC B2562 causes

Several factors can lead to the occurrence of DTC B2562, including:

• Wiring issues such as frayed or damaged wires
• Corrosion or poor connections in the circuit
• Faulty blower motor resistor
• Defective blower motor
• Issues with the vehicle’s control module

DTC B2562 seriousness

The seriousness of DTC B2562 can vary based on the vehicle’s use and climate conditions. While it may not pose an immediate safety risk, it can lead to discomfort due to inadequate cabin cooling. If left unaddressed, it may result in further damage to the air conditioning system or related components.

How to diagnose DTC B2562

To diagnose DTC B2562, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2562 code.
2. Inspect the wiring and connectors associated with the auxiliary A/C blower for any visible damage or corrosion.
3. Test the blower motor resistor for continuity and proper operation.
4. Check the blower motor itself for functionality.
5. Examine the vehicle’s control module for any faults or software issues.
6. Clear the code and perform a test drive to see if the code reappears.

How to fix DTC B2562 step-by-step instructions

To fix DTC B2562, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on electrical components.
2. Inspect and repair any damaged wiring or connectors in the auxiliary A/C blower circuit.
3. Replace the blower motor resistor if it is found to be faulty.
4. Test the blower motor and replace it if it is not functioning correctly.
5. Reconnect the battery and clear the DTC using an OBD-II scanner.
6. Perform a test drive to verify that the auxiliary A/C blower operates correctly at speed 1.

How to erase DTC B2562

To erase DTC B2562, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the trouble codes section on the scanner.
4. Select the option to clear or erase the codes.
5. Confirm the action and wait for the scanner to indicate that the codes have been cleared.
6. Disconnect the scanner and perform a test drive to ensure the code does not return.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.