B2570 – OBD-II DTC

OBD-II DTC B2570 – Right Lamp Outage Signal Circuit Short to Ground

DTC B2570 meaning

DTC B2570 refers to a diagnostic trouble code indicating a “Right Lamp Outage Signal Circuit Short to Ground.” This code is triggered when the vehicle’s onboard diagnostic system detects a short circuit in the right lamp outage signal circuit, which is responsible for monitoring the status of the right side lighting components, such as headlights, taillights, or turn signals. A short to ground means that the circuit is unintentionally connected to the vehicle’s chassis, causing incorrect readings and potentially leading to malfunctioning lights.

DTC B2570 symptoms

Common symptoms associated with DTC B2570 may include:

• Illumination of the check engine light or warning indicator on the dashboard.
• Inoperative right side lights, including headlights, taillights, or turn signals.
• Flashing or flickering lights on the right side.
• Possible issues with other electrical components related to the lighting system.

DTC B2570 causes

Several factors can lead to the triggering of DTC B2570, including:

• A damaged or frayed wiring harness in the right lamp circuit.
• Corrosion or poor connections at the lamp sockets or connectors.
• Faulty right side lighting components, such as bulbs or LED modules.
• Moisture intrusion in the lighting circuit, leading to short circuits.
• Issues with the vehicle’s body control module (BCM) or other related control modules.

DTC B2570 seriousness

DTC B2570 is considered a moderate to serious issue, primarily because it affects the vehicle’s lighting system. Inoperative or malfunctioning lights can lead to safety hazards, especially during nighttime driving or inclement weather. Additionally, driving with non-functional lights may result in legal penalties or fines. It is essential to address this code promptly to ensure safe vehicle operation.

How to diagnose DTC B2570

To diagnose DTC B2570, follow these steps:

1. Use an OBD-II scanner to confirm the presence of the B2570 code.
2. Inspect the right lamp circuit wiring for visible damage, fraying, or corrosion.
3. Check the right side lighting components for proper operation and replace any faulty bulbs or modules.
4. Test the continuity of the wiring harness to ensure there are no shorts to ground.
5. Examine the connectors and sockets for corrosion or poor connections.
6. Use a multimeter to check for voltage and ground at the right lamp circuit.
7. Inspect the body control module (BCM) for any faults or software issues.

How to fix DTC B2570 step-by-step instructions

To fix DTC B2570, follow these step-by-step instructions:

1. Disconnect the vehicle’s battery to ensure safety while working on the electrical system.
2. Inspect the right lamp circuit wiring for any signs of damage or wear, and repair or replace as necessary.
3. Check the right side lighting components, replacing any burnt-out bulbs or faulty LED modules.
4. Clean any corroded connectors and ensure all connections are secure.
5. Test the wiring harness for continuity and check for shorts to ground using a multimeter.
6. If necessary, replace the body control module (BCM) if it is determined to be faulty.
7. Reconnect the battery and clear the DTC using an OBD-II scanner.
8. Perform a test drive to ensure the issue is resolved and the code does not reappear.

How to erase DTC B2570

To erase DTC B2570, follow these steps:

1. Connect an OBD-II scanner to the vehicle’s diagnostic port.
2. Turn on the vehicle’s ignition without starting the engine.
3. Navigate to the “Erase Codes” or “Clear DTCs” option on the scanner.
4. Confirm the action to clear the trouble codes from the vehicle’s memory.
5. Disconnect the scanner and turn off the ignition.
6. Start the vehicle and monitor for any reoccurrence of the DTC.

Recommended tools for OBD-II diagnostics

Explore our expert picks: The Best OBD2 Scanners for 2025

Easy-to-use Multimeter for reliable diagnostics: AstroAI Auto-ranging Multimeter

Some of the links on this page may be affiliate links, which means we may earn a small commission if you make a purchase. This helps us keep our DTC database up to date and provide valuable content for free. We only recommend products that we have tested and believe to be the best in their class.